ViVOtech Inc. 30SCA User Manual
7 VeriFone Ruby Installation Guide V 1.0
6. Verify the installation and terminate the test
The Strip is correctly installed if your POS terminal continues to display successful
readings after the Strip has been affixed.
readings after the Strip has been affixed.
7. Install the cable support clips
Carefully position the strip into the slot exactly
in the middle range of the two pencil marks.
When the strip is in position where the POS
readings are successfully displayed, press the
top of the strip against the terminal to ensure
the adhesive holds tightly.
in the middle range of the two pencil marks.
When the strip is in position where the POS
readings are successfully displayed, press the
top of the strip against the terminal to ensure
the adhesive holds tightly.
Re-start the ViVOpay by removing and
reinserting the power plug.
reinserting the power plug.
Swipe a standard credit or debit card
backwards (so that no transaction occurs)
through the card swipe slot to make sure there
is no excessive friction.
backwards (so that no transaction occurs)
through the card swipe slot to make sure there
is no excessive friction.
To attach the support clip to the Strip cable,
remove the protective covering from the
adhesive on the bottom of the clip.
remove the protective covering from the
adhesive on the bottom of the clip.