ICP DAS Co. Ltd. ZM31001100-PA User Manual
ZM-1100-PA/ZM-3100-PA User’s Manual, Ver. 1.0 Page 2
1. Introduction
The ZM-1100-PA/ZM-3100-PA is a FCC certified design and a small-sized wireless-UART
converter solution consisting of a micro controller unit with RF transceiver and a RF power amplifier
front-end, or often called the low-noise amplifier (LNA), and it offers excellent the sensitivity. ZM
module is based on the 2.4 GHz IEEE 802.15.4 standard, and it contains ZigBee firmware and can
be controlled through an external host/system microcontroller or external evaluation software through
the UART interface. We use the same hardware but the different firmware to achieve the ZigBee
Coordinator or Router.
2. Models
front-end, or often called the low-noise amplifier (LNA), and it offers excellent the sensitivity. ZM
module is based on the 2.4 GHz IEEE 802.15.4 standard, and it contains ZigBee firmware and can
be controlled through an external host/system microcontroller or external evaluation software through
the UART interface. We use the same hardware but the different firmware to achieve the ZigBee
Coordinator or Router.
2. Models
ZM-1100-PA/ZM-3100-PA module is intended for OEM integrator. The modules includes PA/LNA,
Dipole Antenna Connector. It depends on market positioning to install firmware.
3. Features
• 48.1 mm x 29 mm PCB
• 7x2 mm spacing pin connector
• Utilizes globally available 2.4 GHz ISM band
• Control and Configuration with specific commands via UART@115.2Kbps.
• Programmable Transmit Power Output, Max 1
3. Features
• 48.1 mm x 29 mm PCB
• 7x2 mm spacing pin connector
• Utilizes globally available 2.4 GHz ISM band
• Control and Configuration with specific commands via UART@115.2Kbps.
• Programmable Transmit Power Output, Max 1
dBm.
• Typical Receiver Sensitivity -97dBm.
• Typical Data Rate 250Kbps.
• Complete IEEE 802.15.4 Spec. compliant.
• ZigBee 2007 Pro installed.
• 65527 unique node addresses.
• Typical transmission range 700 meters(Line of Sight).
• Required Supply Voltage: 2 to 3.6VDC.
• Operating Temperature: -25°C to +75°C
• Storage temperature: -40 to +80
• Typical Data Rate 250Kbps.
• Complete IEEE 802.15.4 Spec. compliant.
• ZigBee 2007 Pro installed.
• 65527 unique node addresses.
• Typical transmission range 700 meters(Line of Sight).
• Required Supply Voltage: 2 to 3.6VDC.
• Operating Temperature: -25°C to +75°C
• Storage temperature: -40 to +80
°
C
• RoHS.
4. Protocol Overview
4. Protocol Overview
The bidirectional data exchange between an external host/system microcontroller and the
ZM-1100-PA/ZM-3100-PA uses the hardware UART and follows the RS232 protocol. This RS232
protocol is summarized in Table 1.
protocol is summarized in Table 1.
Table 1. Host RS232 Serial Interface Communication Parameters
PARAMETER PARAMETERS
DESCRIPTION
Baud Rate
115.2Kbps
Start Bits
1
Data Bits 8
8
Stop Bits 1
1
Parity None
None