Insis Co. Ltd. ISR-110C User Manual
How to assemble and install Link it
Link it Reader
a
Cradle
b
To assemble Link it Reader and Cradle in
vertical direction
To connect Serial Port Cable Connector with
Com 1 or Com 2 port of P.C
To separate Connector of Keyboard from P.C.
To connect Power Connector with Keyboard
To connect Power Connector with Keyboard
Port of P.C. and to connect Connector of
Keyboard with the end of Power Connector.
Keyboard with the end of Power Connector.
To insert Card into Link it Reader as shown in
left side picture.
To remove Card from Link it Reader with Link
it Reader being fixed by hand.
Components of Link it
Link it Reader
Cradle
RS-232C Cable and Power Cable
User’s Guide
DC5V/100mA
Link it Power
To avoid installing “Link it” in humid or dusty
or corrosive gas circumstances
To keep Link it far away from fire.
Do not give vibration or impact upon Link it
Do brush the outside of Link it with dry rag,
not with inflammable materials such as
alcohol or benzene, etc.
alcohol or benzene, etc.
Do not dismantle Lint it at discretion as it’s
composed of electronic precision circuits.
Be cautious not to infiltrate water or coffee
into the inside of Link it..
To call A/S center of Insis Co., Ltd. for any
inquiry or breakdown.
Inquiry about Link it and A/S
Insis Co., Ltd.
Tel.) 02-3421-0800
Fax.) 02-3421-0805
http://www.insis.net
Serial Port
Cable
Cable
Serial Port
Keyboard Port
Power
Connecter Cable
Connecter Cable
Welcome to Smart Card World
Cautions