ZTE Corporation 008Z User Manual
14
as on the body as described in this user guide**.
As SAR is measured utilizing the device's highest
transmitting power, the actual SAR of this device while
operating is typically below that indicated above. This is
due to automatic changes to the power level of the device to
ensure it only uses the minimum power required to
communicate with the network.
transmitting power, the actual SAR of this device while
operating is typically below that indicated above. This is
due to automatic changes to the power level of the device to
ensure it only uses the minimum power required to
communicate with the network.
* The tests are carried out in accordance with IEC 62209-2:
2010, EN 62209-1:2006.
2010, EN 62209-1:2006.
** Please see body worn operation.
Body Worn Operation
Important safety information regarding radio frequency
radiation (RF) exposure:
radiation (RF) exposure:
To ensure compliance with RF exposure guidelines the
phone must be used with a minimum of 15 mm separation
from the body.
phone must be used with a minimum of 15 mm separation
from the body.
Failure to observe these instructions could result in your RF
exposure exceeding the relevant guideline limits.
exposure exceeding the relevant guideline limits.
Limiting Exposure to Radio Frequency (RF)
Fields
Fields
For individuals concerned about limiting their exposure to RF
fields, the World Health Organization (WHO) provides the
following advice:
fields, the World Health Organization (WHO) provides the
following advice: