kIWA TECHNOLOGY CO. LTD. RF-031 User Manual

THIS DEVICE COMPLIES WITH PART 15 OF THE FCCRULES. OPERATIONS

IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: ( 1 ) THIS DEVICE

MAY NOT CAUSE HARMFUL INTERFERENCE AND ( 2 ) THIS DEVICE MUST

ACCEPT ANY INTERFERENCE RECEIVED. INCLUDING INTERFERENCE

THAT MAY CAUSE UNDESIRED OPERATION.

INSTALLATION:

A.  TRANSMITTER

1.  POWER SUPPLY : PLUG THE ADAPTOR TO MAINS SOCKET AND

THE DC CONNECTOR TO DC 9 VOLT INPUT CONNECTOR LOCATED

ON THE REAR PANEL OF THE TRANSMITTER.

2.  AUDIO CONNECTIONS:

a.  CONNECT THE 2.0mm BLACK COLOR CONNECTOR OF THE

AUDIO CABLE TO AUDIO IN JACK ON THE REAR PANEL OF

THE TRANSMITTER.

b.  CONNECT THE 3.5mm GREEN COLOR CONNECTOR TO AUDIO

SOURCE SUCH AS PHONE JACK OF THE COMPUTER.

c.  CONNECT THE 3.5mm RED COLOR CONNECTOR TO

MICROPHONE JACK OF THE COMPUTER.

d.  PUSH DOWN THE POWER BUTTON ON THE TRANSMITTER,

THE POWER LED WILL ON .

B.  RECEIVER

1.  REMOVE THE BATTERY COVERY OF THE RECEIVER UNIT.

2.  ACCORDING TO THE POLARITY INSTRUTION ON THE RECEIVER

UNIT,PUT THE BATTERY ( AAA X 2 )TO THE RECEIVER THEN PUT

BACK THE BATTERY COVERY.

3.  PLUG IN THE HEADPHONE CONNECTOR TO RECEIVER UNIT.

4.  SWITCH ON THE ON/OFF SWITCH, LED WILL ON.

5.  ADJUSTING THE VOLUME TO THE DESIRED LEVEL WITH THE

VOLUME CONTROL.

NOTICE : THE CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED

BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE

USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

INSTALLATION