Linksys M10V2 User Manual

Chapter 3: Advanced Configuration

9. You can filter access to various services accessed over

the Internet, such as FTP or telnet. (You can block up to
three applications per policy.)

From the Applications list, select the application you
want to block. Then click the >> button to move it to
the Blocked List. To remove an application from the
Blocked List, select it and click the << button.

10. If the application you want to block is not listed or you

want to edit a service’s settings, enter the application’s
name in the Application Name field. Enter its range
in the Port Range fields. Select its protocol from the
Protocol drop-down menu. Then click Add.

To modify a service, select it from the Application list.
Change its name, port range, and/or protocol setting.
Then click Modify.

To delete a service, select it from the Application list.
Then click Delete.

11. Click Save Settings to save the policy’s settings. To

cancel the policy’s settings, click Cancel Changes.

Applications and Gaming > Single Port
Forwarding

The Single Port Forwarding screen allows you to customize
port services for common applications on this screen.

When  users  send  these  types  of  requests  to  your  network
via the Internet, the Valet will forward those requests to the
appropriate  servers  (computers).  Before  using  forwarding,
you  should  assign  static  IP  addresses  to  the  designated
servers  (use  the  DHCP  Reservation  feature  on  the  Basic
Setup screen, refer to DHCP Reservation, page 16 for more
details).

Applications and Gaming > Single Port Forwarding

Single Port Forwarding

Common applications are available for the first five
entries. Select the appropriate application. Then enter the
IP address of the server that should receive these requests.
Select Enabled to activate this entry.

For additional applications, complete the following fields:

Application Name

Enter the name you wish to give the

application. Each name can be up to 12 characters.

External Port

Enter the external port number used by

the server or Internet application. Check with the Internet
application documentation for more information.

Internal Port

Enter the internal port number used by

the server or Internet application. Check with the Internet
application documentation for more information.

Protocol

Select the protocol used for this application,

either TCP or UDP, or Both.

To IP Address

For each application, enter the IP address

of the PC that should receive the requests. If you assigned
a static IP address to the PC, then you can click DHCP
Reservation on the Basic Setup screen to look up its static
IP address (refer to DHCP Reservation, page 16 for more
details).

Enabled

For each application, select Enabled to enable

port forwarding.

Click Save Settings to apply your changes, or click Cancel
Changes to cancel your changes.

Applications and Gaming > Port Range
Forwarding

The  Port  Range  Forwarding  screen  allows  you  to  set  up
public  services  on  your  network,  such  as  web  servers,
FTP  servers,  e-mail  servers,  or  other  specialized  Internet
applications.  (Specialized  Internet  applications  are  any
applications  that  use  Internet  access  to  perform  functions
such as videoconferencing or online gaming. Some Internet
applications may not require any forwarding.)

If you need to forward all ports to one computer, click the
DMZ tab.