Mobilicom ltd. MCU-30L User Manual
MCU-30 User Manual
Page : 8 / 51
This page contains information which is protected by copyright and is proprietary to Mobilicom Ltd.
No part of this document
may be used, copied, disclosed or conveyed to another party without prior written consent of Mobilicom Ltd
1
Quick Start Guide
If you are familiar with Mobilicom's MCUs, use this guide to prepare for operation. If
you are not familiar with the Mobilicom MCUs, it is recommended to read the entire
user guide. You can also visit the Mobilicom website for more material and videos at
you are not familiar with the Mobilicom MCUs, it is recommended to read the entire
user guide. You can also visit the Mobilicom website for more material and videos at
Before turning the MCU on:
1. Connect antennas to the MCU RF1 and RF2 connectors.
2. Connect the GPS antenna to the AUX connector (For a Mobile MESH and
Collaborative MESH links it is mandatory to connect the GPS antenna).
3. Connect the data cable to the MAIN connector.
4. Connect the power cable.
5. Connect a DC power source to the power cable according to the specification.
6. If the MCUs are pre-configured, they will start operating automatically (plug and
play).
5. Otherwise: connect an Ethernet cable between the data cable and the
PC’s
Ethernet adapter.
7. Use the MC-EMA to configure the unit.
CAUTION – Powering up an MCU unit without connecting the antennas
can cause unrepairable damage to the MCU-30.
can cause unrepairable damage to the MCU-30.