Cardo Systems ER01 User Manual
scala-rider manual
DRAFT APRIL 25, 2005
Page 18 of 31
8.3.1 Enter search mode
While the radio is on, press and hold for 3 seconds the Volume Up or
Volume Down button on your headset to start searching.
Pressing Volume Up will search upwards (higher frequency) and
pressing Volume Down will search downwards (lower frequency).
Once the radio finds a station it will stop and you will be able to hear
this station.
To save this station refer to section 8.3.2.
To continue searching, press the Volume Up/Volume Down again for
three seconds.
Within 20 seconds of finding a station, if you don’t save the station
and don’t search for another station the radio will exit search mode
without saving the current station. You can still continue listen to the
current unsaved station. Pressing the Radio button in this case will
move to the next saved station.
Volume Down button on your headset to start searching.
Pressing Volume Up will search upwards (higher frequency) and
pressing Volume Down will search downwards (lower frequency).
Once the radio finds a station it will stop and you will be able to hear
this station.
To save this station refer to section 8.3.2.
To continue searching, press the Volume Up/Volume Down again for
three seconds.
Within 20 seconds of finding a station, if you don’t save the station
and don’t search for another station the radio will exit search mode
without saving the current station. You can still continue listen to the
current unsaved station. Pressing the Radio button in this case will
move to the next saved station.
8.3.2 Saving radio station
Before searching for a station to save, tap the Radio button until you
find the station you want to replace.
When you find a radio station you want to save by searching as
describes in section [8.3.1, tap the Radio button to save the current
station.
find the station you want to replace.
When you find a radio station you want to save by searching as
describes in section [8.3.1, tap the Radio button to save the current
station.