G.G. Telecom 0011 User Manual
Multi-point
Technology
Technology
Power ON your headset:
Power OFF your headset:
To enter Pairing mode:
To Answer or End a call:
To Reject a call*:
To Redial the last call*:
To activate Voice Dialing:
To adjust the Volume:
To Disable/Enable the LED light indicators:
To Reset your headset to factory settings:
or
The device complies with Part 15 of he FCC rules.
Operation is subject to the following two conditions:
Operation is subject to the following two conditions:
15.21
15.105(b)
To pair with another device
To connect 2 devices with your headset
To Redial the last call* / To activate Voice
To Answer / End / Reject a call*
To answer a call on one mobile while talking on the other.
Note: There is no chance for placing first call on
hold while answering the second call.
www.gg2002.com
1
2
3
4
Getting started
Introduction
Headset Call Controls
Headset Call Controls
1. MFB(Multi Function Button)
2. Volume Up Button
3. Volume Down Button
2. Volume Up Button
3. Volume Down Button
Pairing with your Bluetooth device
Before you can use your headset, you must ’link
link’ it
with the device you wish to use.
Step A: Put your headset in Pairing Mode
Step A: Put your headset in Pairing Mode
Method1
When your headset is , not turn on, long press the
MFB button until the red and blue light alternate.
When your headset is , not turn on, long press the
MFB button until the red and blue light alternate.
Method2
When your headset in standby mode, (blue light
blinking 1 time every 4 seconds), long press the
Volume Up button until the red and blue light
alternate.
2. Volume Up Button
3. Volume Down Button
1.
MFB
(Multi Function Button)
3.Select your headset from the
list of discovered device
list of discovered device
4.Enter the Pincode
/Passkey “0000”
“0000”
5.Select your headset from the list
of paired device.
of paired device.
Note:
Note:After pairing, some devices.
will automatically connect to
your bluetooth headset, and
some will not.
your bluetooth headset, and
some will not.
Step C: Initial Test
Step C: Initial Test
Your headset and your phone should now be paired
and connected, ready to make and receive calls.
To confirm they are successfully paired and operating
properly please try the following.
and connected, ready to make and receive calls.
To confirm they are successfully paired and operating
properly please try the following.
1.On your phones keypad, dial a contact you wish to
call.
2.Press Send
call.
2.Press Send
Send on your phone to initiate the call.
The call will be heard on the headset.
Charging your Headset
Charging of your headset will take about 1.5 hours.
Follow the procedure as follows:
1.Insert the headset Wall Charger into a DC power
source and switch ON.
source and switch ON.
2.Insert the plug on the end of the headset charging
cable into your headset as shown below.
cable into your headset as shown below.
3.The Red LED indicators will light up showing that
the headset is being charged.
the headset is being charged.
The Red LED
indicator is off
indicator is off
is off
The Red LED
indicator turns on
indicator turns on
turns on
4. When charging is complete the Red LED indicat-
ors will turn off.
5. Remove the charger plug from the headset then
switch off the charger.
ors will turn off.
5. Remove the charger plug from the headset then
switch off the charger.
Step B: Pairing your headset to your phone/device
Step B: Pairing your headset to your phone/device
1.Turn on the Bluetooth function of your phone/device
2.Perform a “Bluetooth device discovery
2.Perform a “Bluetooth device discovery
Bluetooth device discovery” from your
phone or device.
Paired devices
(no paired devices)
New paired device
Help
Exit
Exit
Select
Cancel
Paired devices
(no paired devices)
Bluetooth
Baby-a
Select
Cancel
Paired devices
(no paired devices)
Bluetooth
Passcode for Baby-a
Select
Cancel
123
0000
1.Indicator LED
1.Indicator LED
There are 3 colors(blue/red/purple) to show the status of your headset.
2.Multifunction button
2.Multifunction button
To answer, end, reject a call and control advance functions by constituting with
volume control button
volume control button
(please refer to the Function/Button matrix).
3.
3.Volume control button
olume control button
To increase or decrease the volume of speaker and control advance functions
by constituting with MFB
by constituting with MFB
(please refer to the Function/Button matrix).
4.Ear-hook
4.Ear-hook
To wear the headset on your ear, you can switch the direction as your habit.
5. Speaker
5. Speaker
Plays the sound you receive on the call or the audio indicators
6. Microphone
6. Microphone
Voice input for outgoing voice.
Tel : + 886-2-87510222
Fax: + 886-2-87510668
Website : www.gg2002.com
Email : sales@ggtelecom2002.com
Fax: + 886-2-87510668
Website : www.gg2002.com
Email : sales@ggtelecom2002.com
B l u e t o o t h H e a d s e t
7. Charging Port
7. Charging Port
Plug in the USB charging cable to charge the battery of your headset.
Headset overview
● Bluetooth V2.0
● Bluetooth V2.0
● Multi-point Technology
● Multi-point Technology
● Multi-point Technology
● Firmware Upgradable
● Firmware Upgradable
● Firmware Upgradable
● Echo Supression Technology
● Echo Supression Technology
● Echo Supression Technology
● Up to 10 meters operating range
● Up to 10 meters operating range
● Up to 10 meters operating range
● 100 mAh Li-polymer Battery
● 100 mAh Li-polymer Battery
● 100 mAh Li-polymer Battery
● Support Headset and Handsfree Profile
● Support Headset and Handsfree Profile
● Support Headset and Handsfree Profile
● Weight 9 g
● Weight 9 g
● Weight 9 g
9
220
HOUR
HOUR