Triamp Technology. Ltd. BLUETOOTH User Manual
This quick guide demonstrates how to set up and install the Bluetooth Wireless Car Kit into a vehicle. For
more detailed information about the use and functions of this device, refer to the user’s manual.
Identifying Components
Unpack the Car Kit package and check it contains the following components.
•
One junction box
•
One control module
•
One multi-directional microphone
•
One speaker with mounting bracket
•
One set of power cables
If any items are missing or damaged, contact your dealer.
A.
Installing the Junction Box
The Car Kit is designed to work with the 12-volt power supply of the vehicle. Refer to the following to install
the junction box in a vehicle.
1.
Locate a suitable place inside the car to mount the junction box. Select a dry place that avoids
excessive heat and mechanical vibration. Ideally, the junction box should be hidden from view,
but still easily accessible.
Note:
Make sure that the cables are long enough to support the location of the junction box. If
the cables are not long enough, do not lengthen the cables; relocate the junction box.
2.
Use two screws (not included) to fasten the junction box in place.
B.
Connecting the Power Supply
The following illustration demonstrates how to connect the Car Kit’s power cables to the vehicle’s
electrical system.
GND
Power cables
To car radio
mute (PNP 300mA)
Yellow cable
To battery + 12V
Red cable
To ignition
Blue cable
Black cable