SendFar Technology Co. Ltd. OAB-03001 User Manual
3.1 Wireless Access Bridge-to-Central Wireless
Bridge
Bridge
3.2 Wireless Client Router-to-Central Wireless
Bridge
Bridge
1. Set the Central RB as a bridge (bridge IP address is 192.168.2.1).
1. Set the Central RB as a bridge (bridge IP address is 192.168.2.1).
2. Set Wireless parameters on Central RB: Channel (1) and SSID
(wireless)
2. Set Wireless parameters on Central RB: Channel (1) and SSID
(wireless).
3. Set the Remote RB as a bridge (bridge IP address is 192.168.2.2).
3. Set the Remote RB as a Router (Wireless Interface IP is 192.168.2.2,
Ethernet Interface IP is 192.168.10.1, must turn on NAT on Wireless
Interface, default route is 192.168.2.254).
Interface, default route is 192.168.2.254).
4. Set Wireless parameters on Remote RB: Channel (1) and SSID
(wireless), these parameters must same with Central RB.
4. Set Wireless parameters on Remote RB: Channel (1) and SSID
(wireless), these parameters must same with Central RB.
5. Left side subnet is transparent to the right side.
6. DHCP server assign IP address to PC1 and PC2
6. DHCP server assign IP address to PC1 and PC2
5. Set the DHCP server service on the Remote RB and apply it on
Ethernet Interface.
6. The Remote RB assign IP address to PC1 and PC2
Version 1.00
20
Version 1.00
21