SendFar Technology Co. Ltd. OAB-03001 User Manual

One (1) 30m RJ-45 CAT-5 Ethernet cable 

One (1) 1.8m RS-232 Console Cable 

This chapter describes the procedures for installing the SF-3000. 

One (1) 1.8m Grounding Cable 

One (1) User manual CD-disc 

One (1) wall mounting kit 

One (1) mast mounting kit 

After unpacking the system, make sure the following items are present and 
in good condition. 

 
1. SF-3000 

Installation of the Outdoor Wireless Access Bridge requires: 

2.  24V, 0.83A AC/DC adapter with wall-plug power cord 

 

3.  Inline Power Injector (PoE) 

A Windows-based PC/AT compatible computer or Ethernet data 
device with an available RJ-45 Ethernet port to run the configuration 
program or with TCP/IP connection to the Ethernet network. 

4.  30m RJ-45 CAT-5 Ethernet cable 
5.  Cross over Ethernet Cable 
6.  1.8m RS232 Console Port Cable 

A 10/100Base-T Ethernet RJ-45 Ethernet cable is connected to 
Ethernet network. 

7.  1.8m Grounding Wire 
8.  User’s Manual Disk 

A RS-232 Consol Port cable is connected to PC/AT compatible 
computer. 

9.  Wall/Mast Mounting Kit 
 

An AC power outlet (100~240V, 50~60Hz) supplies the power. 

   

     

     

 

                   

The SF-3000 is equipped with an Inline Power Injector module. The Inline 
Power Injector (PoE) deliver both data and power to the Access Point via a 
signal Ethernet cable.  

 

 
1.  This works great in areas where you may not have power and/or 

Ethernet easily accessible, like a roof.  

2.  This also allows you to more easily place the AP closer to the antenna, 

thus reducing signal loss over antenna cabling. 

3.  Ethernet signal travels well over CAT 5 cable but 2.4GHz signal doesn't 

do as well over antenna cabling.  

4.  Ethernet cabling is much cheaper than Antenna cabling. 

 
 
 
 
 
 
 
 
 
 
 

Version 1.00 

3

 

        

      

   

 

1

2

3

5

4

 

6

7

8

9

 
 
 
 
 
 
 

Version 1.00 

2