SendFar Technology Co. Ltd. OAB-03001 User Manual
5.
When the SF-3000 is powered up, the “Current Network Status” will
be displayed as shown in following:
be displayed as shown in following:
4. (Optional) Modify others parameters on the web page “/General
Config/”, and click FINISH to save your changes.
5. Move on page “/Utility/Administration/”, select the
Save then Restart
and then click FINISH to take effect the previous configuration
changes.
changes.
2.4.3 Logging into the Web Interface
The SF-3000 supports access to the configuration system through the use
of an HTTP Interface (web browser).
- Web Configuration
Before configuring the SF-3000, you need to know the IP Address assigned
to the unit. When shipped from the factory, the IP Address (192.168.5.99)
was assigned to the SF-3000 by default. To start a web connection use:
of an HTTP Interface (web browser).
- Web Configuration
Before configuring the SF-3000, you need to know the IP Address assigned
to the unit. When shipped from the factory, the IP Address (192.168.5.99)
was assigned to the SF-3000 by default. To start a web connection use:
http://192.168.2.1
- Identify the IP Address assigned to the unit
- Web Access Procedures
However, the IP Address may be changed and you cannot connect the unit
using the default IP Address. In this case, you must identify the SF-3000 IP
Address before configuration. To identify the IP Address, you can use the
Serial Port to gain access the current network status.
using the default IP Address. In this case, you must identify the SF-3000 IP
Address before configuration. To identify the IP Address, you can use the
Serial Port to gain access the current network status.
Once you identify the IP Address assigned to your SF-3000, use your web
browser to configure the SF-3000 through the HTTP Interface.
The following procedure explains how to configure each item.
browser to configure the SF-3000 through the HTTP Interface.
The following procedure explains how to configure each item.
To start a Serial Port connection:
1.
Open your browser and enter the IP Address
2. Press
ENTER and the SF-3000 Login screen appear as shown in
following:
1.
Attach a serial data (RS-232) cable to the Serial Port Adapter.
Connect the other cable end to a terminal or a PC running a terminal
emulation program. Use a 9-pin female to 9-pin female NULL Modem
cable.
Connect the other cable end to a terminal or a PC running a terminal
emulation program. Use a 9-pin female to 9-pin female NULL Modem
cable.
Version 1.00
9
2.
Set the terminal to 115200 baud rate, None Parity, 8 data bits, 1 Stop
bit, and ANSI compatible.
bit, and ANSI compatible.
3.
Running a terminal emulation program on your PC, such as Hyper
Terminal, and then set the following connection properties:
Terminal, and then set the following connection properties:
Click the
Start icon
>
Program
>
Accessories
>
Communication
>
Terminal
.
Create a new connection file, and then select a Com Port <COM1,
COM2, etc., depending on your PC> with
115200bps / 8-bits / 1-stop
.
Click the properties icon in the Tool Bar > setting > select
Emulation terminal VT100 > ok.
3. Enter
root in the User Name and the Password fields. And then the
web configuration user interface screen appears as shown in following:
4.
Reboot or turn on your SF-3000.
Version 1.00
8