Redline Communications Inc. AN100UA User Manual
Red
MAX
™
Base Station
User Manual
Doc. #70-00058-01-01
Proprietary Redline Communications © 2007
July 13, 2007
Page 83 of 119
5.2.8 show
The show command is used to display operating information about the base station.
Table 29: CLI - Show Command
Command
Parameter/Description
eventLog
Display system logging events. For example:
Time:.........................Tue May 23 14:17:39
Txt:..........................Radio Type 1: TB3435F7
Time:.........................Tue May 23 14:17:36
Txt:..........................RedMax AN-100U Ver. 1.0.58 started.
Txt:..........................Radio Type 1: TB3435F7
Time:.........................Tue May 23 14:17:36
Txt:..........................RedMax AN-100U Ver. 1.0.58 started.
ifCounters
Display counter statistics of device interfaces. For example:
Structure --- <<Interface statistics>>
64 bits Ingress Counters 64 bits Egress Counters
64 bits Ingress Counters 64 bits Egress Counters
Octets:........................0
Octets:........................0
UcastPkts:...............1876059
UcastPkts:................881643
MulticastPkts:.................0
MulticastPkts:.................0
BroadcastPkts:.................0
BroadcastPkts:............583368
Others
Name:.....................Signal
Name:.....................Signal
InDiscards:....................0
InMulticastPkts:...............0
InErrors:....................350
InBroadcastPkts:...............0
OutDiscards:...................0
OutMulticastPkts:..............0
OutErrors:.....................0
OutBroadcastPkts:.........583368
ifStatus
Display status of device interfaces. For example:
Structure --- <<Interface Status>>
Descr:...........
Descr:...........
802.16
Type:...............
propBWAp2Mp(184
Mtu:..................
2048
Speed:..............
16940000
PhysAddress:....
0:09:02:00:89:
AdminStatus:.....
up(1)
OperStatus:......
up(1)
LastChange:......
00:00:13
interfaces
Display device interfaces. For example:
Index Description MAC Address
1 802.16 00 09 02 00 89 c1
2 802.3 00 09 02 00 89 c1
3 802.3 00 09 02 00 89 c1
1 802.16 00 09 02 00 89 c1
2 802.3 00 09 02 00 89 c1
3 802.3 00 09 02 00 89 c1
ipAddress
Display the IP address data.
Address: <IP Address>
Address: <IP Address>
- IP Address
Mask: <IP Address>
- Subnet Mask.
Dhcp: Enable/disable DHCP support.
0:
0:
Static address entered by user.
1:
DHCP allocated address.
Gateway: <IP Address>
- Default GatewayAddress.
If no field name is specified, the whole data structure is displayed. For
example:
example:
Structure --- <<SC IP Address Data>>
Address:......................192.168.20.97
Mask:.........................255.255.255.0
Dhcp:.........................StaticIP(0)
Gateway:......................192.168.20.250
Address:......................192.168.20.97
Mask:.........................255.255.255.0
Dhcp:.........................StaticIP(0)
Gateway:......................192.168.20.250
sfInfo
Display service flow info.
<MAC Address>
<MAC Address>
- Specify the subscriber MAC address