HIT HBM004 User Manual
Pairing Instruction
When first use this Bluetooth headset, please go through the pairing process with a Bluetooth
supported mobile phone. The pairing process only needs to go through once when first use.
Headset:
1. With the headset turned off (the headset status indicator light is switched off).
2. Press & hold the power key for over 10 seconds (you can hear beeper tones from earpiece
receiver at the 5
th
seconds), the green & red light will be flashing alternately once/second,
meaning that the headset is already in pairing process.
Mobile phone:
When pairing with Bluetooth supported mobile phone, different brands may have different
pairing instructions, please read the user manual carefully before start. The following operation
instructions are based on Nokia 8910 &Ericsson T68:
Nokia 8910
Scroll to Menu- Bluetooth - On
The screen will show “Bluetooth switched on”
Choose “Search for audio accessories”
When the screen shows”
HBM-004”, press Select
Enter passcode: press 0000, then press OK
When the screen shows “connected to HBM-004” & the headset status indicator changes to
green light flashing once in 4 seconds from the green & red light flashing alternately once/
second, meaning that the pairing process succeeds.
Press “ˇ”key on mobile phone to enter “View paired devices” press Select
Press ”
HBM-004” Options, Press “ˇ”key to enter “Request conn. Authorization”
press Select, Select No
The screen will show “No author. Required”
Press Back、Exit return to Main Screen
Attention:
1. For power saving consideration, the headset will disconnect mobile phone
after pairing completing 15 seconds without pressing mobile phone any keys.
And mobile phone screen will show “Disconnected: HBM-004” at the same
time.
2. If pairing process fails, please go through the process again. Finish the
pairing process within 2 minutes if possible.