Hung Park Technology Ltd. 1209R User Manual
Remote Out-let function and spec <Rev 1.1>
Specification -
Operation Voltage - Remote - DC – 2.2V - 3V , 1.5 AAA x 2 pcs
Remote Out-Let - AC – 120V +/- 20V
Transmission Frequency – 315 Mhz
Distance – 100 feet <+0 – 15feet> optional conditions
Max control out-let – 4 pcs
Product size – Remote – 140.5 <long> x 46 <wide> x 24.5 <thickness> mm
Remote Out-Let – 143.5 <long> x 60 <wide> x 61 <thickness with power pin> mm
Product Function list –
Set Up –
Set Up –
1. install 2 pcs AAA alkaline batteries into remote control – Led blinking steadily until 4 dight code is
entered. Example : 1 – 1 – 1 – 1
2. Plug in Remote Outlet into AC outlet, the Remote outlet Led blinking steadily then press a button of
Remote Control.
3. Press the left side key from remote control to choose the number of Remote Outlet ( e.g.: 1,2,3 or 4 )
4. For set up the additional Remote outlet in same Remote control – simply follow step 2.
5. For set up the additional Remote control in same Remote outlet – simple follow step 1 in same code.
Operation -
1. To turn on the Remote outlet (thus any devise plugged in to it), press to corresponding On Key – left
side of the Remote control.
2. To turn off the Remote outlet, press the corresponding Off Key – right side of the Remote control.
3. To turn On/Off all controlled Remote outlet by Remote control, press the “master” Key, On or Off.
4. To turn On/Off the Remote Outlet without the Remote control, briefly press the button on the remote
outlet. Led will be On when Remote outlet is On.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) This device must accept any interference received, including
interference that may cause undesired operation.