Microsoft Corporation RM-43 User Manual

Copyright © 2005 Nokia. All rights reserved. 

—Depending on what data connection you 

select, only certain setting fields are available. Fill in all 
fields marked with 

 or with a red asterisk. 

Other fields can be left empty, unless you have been 
instructed otherwise by your service provider.

To be able to use a data connection, the network service 
provider must support this feature, and if necessary, 
activate it for your SIM card.

Follow the instructions from your service provider.

 (for packet data only)—The access 

point name is needed to establish a connection to the 
packet data and UMTS networks. You obtain the access 
point name from your network operator or service 
provider.

—The user name may be needed to make a data 

connection, and it is usually provided by the service 
provider. The user name is often case-sensitive.

—Select 

 if you must enter a new 

password every time you log in to a server, or if you do not 
want to save your password in your device.

—A password may be needed to make a data 

connection, and it is usually provided by the service 
provider. The password is often case-sensitive.

—Select 

 or 

.

—Depending on what you are setting up, write 

the Web address or the address of the multimedia 
messaging centre. Complete the 

 to 

further define your access details:

—Select the Internet protocol type to use: 

 or 

. The other settings depend 

on the selected network type.

 (for IPv4)—Enter the IP address of your 

device. 

— 

, 

 Contact your Internet service provider to obtain 

these addresses.

 Glossary: The domain name service (DNS) is an 

Internet service that translates domain names such as 
www.nokia.com into IP addresses like 192.100.124.195.

—Define the address for the proxy 

server.

—Enter the proxy port number.

Follow the instructions from your service provider.

—Select 

 or 

. If you select an existing network, 

 and 

 are determined by the 

settings of its access point device.