Microsoft Corporation RM-132 User Manual
Tools
93
Right selection key
—Assign a shortcut to the right
selection key (
) in the standby mode.
Active standby apps.
—Select the application shortcuts
you want to appear in the active standby. This setting is
only available if
only available if
Active standby
is on.
You can also assign keypad shortcuts for the different
presses of the scroll key. The scroll key shortcuts are not
available if the active standby is on.
presses of the scroll key. The scroll key shortcuts are not
available if the active standby is on.
Operator logo
—This setting is only available if you have
received and saved an operator logo. Select
Off
if you do
not want the logo to be shown.
Display
Light sensor
—Press
or
to change the light sensor
mode, and to brighten or darken the display.
Power saver time-out
—Select the time-out period after
which the power saver is activated.
Light time-out
—Select a time-out after which the
backlight of the display is switched off.
Call settings
Send my caller ID
—You can set your phone number to be
displayed to (
Yes
) or hidden from (
No
) the person to whom
you are calling, or the value may be set by your network
operator or service provider when you make a subscription
(
(
Set by network
) (network service).
Call waiting
—If you have activated call waiting (network
service), the network notifies you of a new incoming call
while you have a call in progress. Set the function on
(
while you have a call in progress. Set the function on
(
Activate
) or off (
Cancel
), or check whether the function
is activated (
Check status
).
Reject call with SMS
—Select
Yes
to send a text message
to a caller informing why you could not answer the call.
See ‘Answer or decline a call’, p. 66.
See ‘Answer or decline a call’, p. 66.
Message text
—Write a text to be sent in a text message
when you decline a call.
Automatic redial
—Select
On
, and your device makes a
maximum of 10 attempts to connect the call after an
unsuccessful call attempt. To stop automatic redialing,
press .
unsuccessful call attempt. To stop automatic redialing,
press .
Summary after call
—Activate this setting if you want the
device to briefly display the approximate duration of the
last call.
last call.
1-touch dialing
—Select
On
, and the numbers assigned to
the 1-touch dialing keys (
-
) can be dialed by
pressing and holding the key. See also ‘1-touch dial a
phone number’, p. 65.
phone number’, p. 65.