Tagsys S.A. L200TUNANT500 User Manual
Certification
November 2007
Revision 1.0
11/45
2 Certification
At the moment UL certification is in progress for this product.
2.1 Occupational Health and Safety Notices
TAGSYS CONVEYOR TUNNEL READER has been designed and tested to be in conformity with
the limits given in the European Standard EN 50364 “Limitation of human exposure to
electromagnetic fields from devices used in Electronic Article Surveillance (EAS), Radio Frequency
Identification (RFID) and similar applications” in conjunction with the European Standard EN 50357
describing how to evaluate the exposure level.
the limits given in the European Standard EN 50364 “Limitation of human exposure to
electromagnetic fields from devices used in Electronic Article Surveillance (EAS), Radio Frequency
Identification (RFID) and similar applications” in conjunction with the European Standard EN 50357
describing how to evaluate the exposure level.
CAUTION
:
Modification of any TAGSYS System is prohibited without the written consent of
TAGSYS. Unauthorized modifications may void the conformity of the equipment to safety
standards and will void the TAGSYS warranty.
standards and will void the TAGSYS warranty.
2.2 Regulatory Notices
An RFID system typically composed of an RF emission device such as the CONVEYOR TUNNEL
READER is subject to national regulations that may differ by country.
READER is subject to national regulations that may differ by country.
One important item to consider is the maximum permissible magnetic field intensity at a distance of
10 meters from the antenna that must not exceed 42 dBµA/m in Europe and 38 dBµA/m in US.
10 meters from the antenna that must not exceed 42 dBµA/m in Europe and 38 dBµA/m in US.
The CONVEYOR TUNNEL READER meets these limits.
2.2.1 In Europe (CE and RTTE Directives)
The CONVEYOR TUNNEL READER complies (CE Declaration of Conformity granted) with the
European EMC directive.
European EMC directive.
The CONVEYOR TUNNEL READER complies with the requirements of the Telecommunication
Terminal Equipment Act (FTEG) and the RTTE Directive 1995/5/EC.
Terminal Equipment Act (FTEG) and the RTTE Directive 1995/5/EC.
It is the responsibility of the CIT (Certified Integrators by TAGSYS) to install the CONVEYOR
TUNNEL READER as described in this User’s Guide or in TAGSYS Documentation.
TUNNEL READER as described in this User’s Guide or in TAGSYS Documentation.
If a CONVEYOR TUNNEL READER is further integrated in a different product, it is the
responsibility of the manufacturer of this complementary product to obtain the required
approvals for this product.
responsibility of the manufacturer of this complementary product to obtain the required
approvals for this product.