Tagsys S.A. WIFILIBINVREAD User Manual

 

 

 

WiFi Inventory Reader 

The WiFi Inventory Reader is designed to be reliable and to provide years of trouble-free service. 
Please observe the following general tips: 

ƒ

  Take care not to scratch the device. Keep the device clean. When working with the device, 

use only TAGSYS-approved accessories.  

ƒ

  This device is not waterproof and should not be exposed to rain or moisture. Under extreme 

conditions, water may enter the circuitry.  

ƒ

  Protect the device from extreme temperatures. For example, do not place the device in a 

windowed area where the sun may cause extreme temperatures, and keep it away from 
heaters and other heat sources. 

ƒ

  Do not store or use the device in any location that is extremely dusty, damp, or wet.  

ƒ

  Use a soft, damp cloth to clean the device. If the surface of the device becomes soiled, 

clean it with a soft cloth moistened with a diluted window-cleaning solution. 

This device is a product of superior design and should be handled with care. The suggestions 
below will further increase the lifetime of this device.  

•  Keep the device and all parts and accessories out of the reach of small children. 
•  Keep the device dry. Precipitation, humidity and liquids contain minerals that will corrode 

electronic circuits. 

•  Do not use or store the device in dusty, dirty areas. Its moving parts can be damaged. 
•  Do not store in hot areas. High temperatures can shorten the life of electronic devices, 

damage batteries and warp or melt certain plastics. 

•  Do not store in cold areas. When the device warms up (to its normal temperature), moisture 

can form inside the device, which may damage electronic circuit boards. 

•  Do not attempt to open the device. Non-professional handling of the device may damage it. 
•  Handle the device with care. Shocks may break internal circuit boards. 
•  Do not clean the device with harsh chemicals, cleaning solvents or strong detergents. 

Gently wipe the device with a soft cloth slightly dampened in a mild soap-and-water 
solution. 

•  Do not paint the device. Paint may clog the device’s moving parts and prevent proper 

operation. Paint with metallic contents may limit device performances. 

•  If the device or any accessory are not working properly, take it to your nearest qualified 

TAGSYS representative. 

June 2007 

Revision 1.1c 

7/36