Ameleks Corporation AMRF01 User Manual

Page of 7
RFMO-0201
     
6F, 48, KEELUNG ROAD, SEC. 2, TAIPEI 110, TAIWAN, R.O.C.
TEL: 886-2-2758-6958•FAX: 886-2-2758-6987•E-MAIL: 
ameleks@ameleks.com
•WEBSITE: 
http://www.ameleks.com
        
1
AMELEKS
 
CORP.
M I C R O W A V E   C O M P O N E N T S   D I S T R I B U T I O N
FOR ASIAN TELECOMMUNICATIONS INDUSTRY
General Description
RFMO-0201 is a complete RF board with a protocol-on-micro-processor structure and without extra driver
installation, which is designed to replace the cable between the peripheral and the peripheral and make signal
transmitted over radio. RFMO-0201 uses 433.92 free-licensed ISM band. RFMO-0201 is designed to interface
with RS-232 port, with its featured compact size it can be installed or embedded in various handheld devices.
s  Note 1: Max 2 characters are allowed in every single transmission.
s  Note 2: This product is utilized for control purpose. Continuous data transmission will not be adopted.
s  Note 3: The duration of each transmission shall not be greater than one second and the silent period
between transmissions shall be at least 30 times the duration of the transmission but in no case
less than 10 seconds.
Product Features
FCC Certified
Max. Output Power 10dBm
RF Sensitivity: –102dBm
Communication Range: 5 ~ 60 meters
UART Data Rate: 9.6K bps
433.92 MHz ISM Band
2 Level FSK Modulation
Embedded Micro Processor and UART Interface
Optional On-board 50
Ω
 PCB Loop Antenna
TDMA Access
Application
Simple Robotic Control System