Billion Electric Co. Ltd. BIL-MX210NP User Manual
Product Overview
Device Description (Rear Panel Connectors)
8
BEC MX-210NP User Manual
Rear Panel Connectors
INTERFACE
MEANING
1
4G/LTE Antenna
Connectors
(Main/Aux)
Connectors
(Main/Aux)
SMA female connectors.
Manually screw the cellular antennas tight to the female connectors.
Connect to Main if decide to use one antenna instead of two.
2 Power Source
Power ON/OFF switch
(1) with Power Switch ON: power up by the supplied DC power adapter
(2) with Power Switch OFF: power up by the PoE battery unit
3
Power Jack
(DC IN)
Connect the supplied Power Adapter to this jack.
4 Rest
After the device is powered on, press it 6 seconds or above: to restore to factory default
settings (this is used when you cannot login to the router, e.g. forgot your password)
settings (this is used when you cannot login to the router, e.g. forgot your password)
5
Gigabit Ethernet
(LAN 1 / PoE)
Ethernet LAN: Connected to an Gigabit (1000Mbps) Ethernet device
Ethernet PoE
:
Connect with a 802.3at Gb PoE injector to provide power to the MX-210NP
6
Gigabit Ethernet
(LAN 1 / EWAN)
Ethernet LAN: Connected to an Gigabit (1000Mbps) Ethernet device
Ethernet WAN: Software configurable in the GUI. Connected with a broadband connection
device
device
7 SIM Card Slot
Insert the mini SIM card (2FF) with the gold contact facing down.
Push the mini SIM card (2FF) inwards to eject it
* Power off the MX-210NP before inserting or removing the SIM card(s)
1
2
3
4
5
6
7
1