Advanced Control Technologies Inc. 0608-0X User Manual
ZTH100 Operating Instructions
060902
060902
HomePro
by ADVANCED CONTROL TECHNOLOGIES, INC.
22
list. If a group is named the name will be shown instead of the number. In order to switch a group ON or OFF the “OK”
button is pressed briefly. If the “OK” button is held down the group will be dimmed and it will be possible to add module
to the group being dimmed like mentioned in 5.2.1.2
button is pressed briefly. If the “OK” button is held down the group will be dimmed and it will be possible to add module
to the group being dimmed like mentioned in 5.2.1.2
It looks like this:
If a node information frame is detected the flow is like this:
5.2.3 CONTROLLING SCENES
Scenes are accessed through the scene prefix button (“S”). The remote transmitter will indicate that it is in scene
selecting mode by the display shown in 5.1.2.
selecting mode by the display shown in 5.1.2.
When in this mode the arrow or number keys can be used to select a scene as mentioned in 5.2.1 except for the fact
that scenes will be activated. Once a scene has been activated the remote returns to group mode. Note that scenes
can only be activated, not dimmed or deactivated.
that scenes will be activated. Once a scene has been activated the remote returns to group mode. Note that scenes
can only be activated, not dimmed or deactivated.
However they can include switched off modules and also note that setting a scene will never return a failure message.