My Music Group Limited E13 User Manual

正面

反面

材质：正反面印刷，128G双铜纸

成品尺寸：50x65mm

Press and hold the Multi-function button for about 3 
seconds, hear prompt”Power on”, Blue light flash

Long press the Multi-function button for about 4 
seconds, hear”Power off”, the two earbuds will power 
off together.

1.Press and hold the multi-function button for about 6    

seconds, until you hear “ Power on” then “Pairing”, the 
blue/red lights flash quickly. (the other Earbud should 
be off during this process.)

2.Active the Bluetooth function on your device to 

search the “Sonic Capsule” and connect to it.

3.You will hear prompt” Pairing success, sort 

connected”. It is ready for use.

To charge your earbuds: simply return them to the 
charging station, Press the Power button one time and 
the LED on charging station show blue, and close the 
lid. While charging, the earbuds’s LED show red color, it 
become blue color after full charged.
Charging time: around 1-1.5 hours
Play time: 2hours 

Plug the provided micro USB charging cable into the 
charging station and an active computer USB port or 
USB AC adapter that is plugged into an active wall 
outlet. The LED light is red color and will die out after 
full charged.
Charging time: 2 hours

Short press the multi-function button to answer an 
incoming call / end an ongoing call;
Long press the multi-function button to refuse an 
incoming call
Double press the multi-function button to call the 
number that last called you
REMARK: the operation only support master earpiece.

1.Keep the distance between the device and the              

Bluetooth Earbuds within 3 feet(for pairing only)

2.Press and hold the multi-function button on both    

earbuds for a few seconds until you hear prompt “ 

Power on”, and see blue lights flashing 
3.You will hear prompt”Left Channel” on Left Earbud 

and “ Right Channel” on Right Earbud to begin pairing.

Active the Bluetooth function on your device to search 
the“Sonic Capsule” and connect to it. You will hear ” 
Pairing success, sort connected” from the Master 
Earbud(Right Earbud-Factory default setting), and blue 
lights flashing. It is ready for use.

NOTE:
Factory default setting is RIGHT Earbud as MASTER 
Earbud. To reset/change MASTER Earbud, hold 
multi-function button on BOTH earbuds for 6 
seconds. When blue/red lights flash quickly, press 
multi-function button twice on the earbud you 
want to set as the MASTER Earbud.

 Bluetooth version: 4.2
 Speakers: D8mm *2 
 Frequency response: 200HZ-200KHZ
 Battery build-in earpiece: 40mAh*2
 Charging Station battery: 600mAh
 Charging current: 60mA DC 5V

FCC ID：QIFE13

NOTE: This equipment has been tested and found to comply with the limits for a 

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are 

designed to provide reasonable protection against harmful interference in a 

residential installation. This equipment generates uses and can radiate radio 

frequency energy and, if not installed and used in accordance with the instructions, 

may cause harmful interference to radio communications. However, there is no 

guarantee that interference will not occur in a particular installation. If this 

equipment does cause harmful interference to radio or television reception, which 

can be determined by turning the equipment off and on, the user is encouraged to 

try to correct the interference by one or more of the following measures: 

 - Reorient or relocate the receiving antenna. 
- Increase the separation between the equipment and receiver. 
-Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected. 
-Consult the dealer or an experienced radio/TV technician for help 

Changes or modifications not expressly approved by the party responsible for compliance  
could void the user's authority to operate the equipment.   This device complies with Part 
15 of the FCC Rules.  Operation is subject to the following two conditions:  
(1) this device may not cause harmful interference, and  
(2) this device must accept any interference received,  including interference that may 
cause undesired operation.