Rayence Co. Ltd. RYRWM001A User Manual
PART I. User & Installation Manual
98
1417WGC/WCC
3.
Set Manual bad pixel map (BPMM) as below.
No.
Overview
1
At Figure 1, choose S from the list of M(
❶) and click "BPM". Check if BPMM window is
popped up as Figure 3.
2
Choose "Bad" from Pixel list (Figure 3 -
❷ ).
3
Choose either “row” or “col” from Figure 3 -
❸.
4
Put the coordinate of pixel to set bad pixel at Figure 3 -
❹.
5
If bad pixel is a line, put the range as below at Figure 3 –
❺.
From
To
Row
0
3327(127type)
2449(140type)
Col
0
2815(127type)
2992(140type)
If bad pixel is not a line but some pixels, put the rest coordinate at Figure 3 -
❺.
6
After completing step 5 , check if bad pixel has been changed to green as Figure 2 -
❻.
7
Click “Fill” at Figure 3 -
❼.
8
Click "Save" at Figure 3 -
❽.
4.
Once setting BPMM is done, “BPMM.raw” file will be saved at C:\Davinci\CAL.