Falcom GmbH FOX User Manual
FOX H
ARDWARE
M
ANUAL
- P
RELIMINARY
-
V
ERSION
1.0.0
4 TECHNICAL DATA
4.1 Product features
Supply voltage range:
➢
Operating power supply voltage range of +10.8 V to
+35.0 V , suitable for direct connection to an automotive
+12V or +24V DC power source (car battery).
Power saving:
➢
8 different energy-saving modes - programmable with
PFAL commands.
Operating temperature range:
➢
Physical characteristics:
➢
Size: 5
6.0 ± 0.1 mm x 172.0 ± 0.1 mm x 39.0 ± 0.1 mm
➢
Weight:
ca. 229 gr.
➢
C
able length:
1 m
Physical Interfaces:
➢
Eight-wire cable with an 8-pin connector on the end:
✔
3 x I/Os multi functional (Input/Output and Analog
Input),
✔
1 x Ignition (with software - controlled feature),
✔
1 x Power supply (with software - controlled feature)
✔
1 x Serial port (Rx, Tx), Baud rate is controlled by firmware
(by default 57600 bps), 8 data bits, no parity, 1 stop bit,
no flow control,
➢
SIM Card interface (for 1.8 and 3 V SIM cards)
➢
3 x
LED indicators (free-programmable by the software)
Hardware options
➢
CAN interface
– occupies 2 of 3 available I/Os (IO2 and IO3),
➢
3D motion
sensor,
➢
Micro-SD
- for additional memory (CAN),
Casing:
➢
Fully shielded
Certifications:
➢
Fully type approved confirming with R&TTE directive,
➢
FTA / FCC /PTCRB/ e1 / CE
Directive:
➢
RoHS compliant.
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
Page 13 of 31