Falcom GmbH TANGO56I User Manual
TANGO55/
I
& TANGO56/
I
V
ERSION
1.03
The integration of TCP/IP stack with hardware extension (a TCP/IP-
module added) into the equipment converts it to a stand-alone client
that can be connected to the internet via GPRS network. The modem
can also send and receive data by GSM (set into Command-Mode)
can also send and receive data by GSM (set into Command-Mode)
and GPRS network using TCP/IP stack. It supports SMS, DATA and FAX
calls. The TANGO55i modem can be easily controlled by using TCP and
AT commands. The “TCP Command Set” manual is also issued as
AT commands. The “TCP Command Set” manual is also issued as
separate document and is available on the distributed CD for the
TANGO55i’s users.
TANGO56
is a Tri-band GSM/GPRS device that operates on three frequencies
GSM 900 MHz, DCS 1800 MHz and PCS 1900 MHz, and is available to use
in the European and Asia Networks.
TANGO56i
is also a Tri-band GSM/GPRS device that operates on three frequencies
GSM 850 MHz, DCS 1800 MHz and PCS 1900 MHz, and is available to use
in the American Networks. However, the TANGO56i modem contains
1800 MHz GSM functions that is not operational (not allowed for use) in
1800 MHz GSM functions that is not operational (not allowed for use) in
U.S. Territories. This filing is only applicable for 850MHz GSM/1900 MHz
PCS operations, whereby only these frequencies (850MHz GSM/1900
MHz PCS) are possible to be used in U.S. Territories. The TANGO56i
MHz PCS) are possible to be used in U.S. Territories. The TANGO56i
modem provides a specific soft- and hardware (internal TCP/IP stack
software with hardware extension) which has been internally
software with hardware extension) which has been internally
implemented for using the embedded TCP/IP stack software.
The integration of TCP/IP stack with hardware extension (a
TCP/IP-module added) into the equipment converts it to a stand-alone
The integration of TCP/IP stack with hardware extension (a
TCP/IP-module added) into the equipment converts it to a stand-alone
client that can be connected to the internet through any GSM
850/1800/1900 network. The modem can also send and receive data
by GSM (set into the Command-Mode) and GPRS network using TCP/IP
by GSM (set into the Command-Mode) and GPRS network using TCP/IP
stack. It supports SMS, DATA and FAX calls. The TANGO56i modem can
be easily controlled by using TCP and AT commands. The “TCP
Command Set” manual is also issued as separate document and is
Command Set” manual is also issued as separate document and is
available on the distributed CD for the TANGO56i’s users.
Regarding the electrical interfaces, mechanical specification (dimension, form etc.)
and electrical specification are the same to all modems.
Please note that, according to your requirement you can choose the desired
and electrical specification are the same to all modems.
Please note that, according to your requirement you can choose the desired
device.
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.
Page 6