Sensors & Software Inc. NG250 User Manual
Noggin
7-Rock Noggin Assembly (Noggin 500 & 1000 only)
39
Attach the Digital Video Logger (DVL): The bottom of the Digital Video Logger is designed to
slide onto the support shelf attached to the Rock Noggin frame (see Figure 7-11). Line up the
bottom of the Digital Video Logger with the shelf and slide it back onto the shelf. Push the Digital
Video Logger back far enough so that the flexible clip on the front of the shelf catches and holds
the Digital Video Logger firmly in place. Wiggle the DVL to make sure it is firmly snapped in
before letting go of the unit. (To remove the Digital Video Logger from the Rock Noggin frame,
this clip must be flexed downward as the DVL is slid forward off of the shelf.
slide onto the support shelf attached to the Rock Noggin frame (see Figure 7-11). Line up the
bottom of the Digital Video Logger with the shelf and slide it back onto the shelf. Push the Digital
Video Logger back far enough so that the flexible clip on the front of the shelf catches and holds
the Digital Video Logger firmly in place. Wiggle the DVL to make sure it is firmly snapped in
before letting go of the unit. (To remove the Digital Video Logger from the Rock Noggin frame,
this clip must be flexed downward as the DVL is slid forward off of the shelf.
The two handscrews on the bottom of the DVL shelf can be loosened to allow the DVL to be
rotated to a different position on the Rock Noggin frame.
rotated to a different position on the Rock Noggin frame.
Figure: 7-12 Connect the end of the grey cable to the receptacle on the handle at the back of the frame. This
receptacle is adjacent to the Smart button.
Figure: 7-13 Attach the end of the cable with the 37 socket (female) connection to the back of the Digital Video
Logger (DVL). Use a slotted screwdriver to tighten the connection.