Longshine LCS-C842MT Leaflet
LONGSHINE
Technologie (Europe) GmbH
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
LCS-C842SC-20/30/60 (km):
Enhanced 10/100Base-TX to 100Base-FX Single Mode Media Converter (SC Connector)
Post Address: P.O.Box 2246
D-22 912 Ahrensburg
Tel: ++49-(0)-4102-4922-0
House Address: An der Strusbek 9 D-22 926 Ahrensburg
Fax: ++49-(0)-4102-40109
WEB: http://www.longshine.de
E-MAIL: sales@longshine.de
Geschäftsführer:
Dresdner Bank AG
Registergericht:
St.-Nr.: 30 292 087 98
Dr. Rong-Jye Lu
BLZ 200 800 00, Kto.-Nr. 7 211 375 00
Ahrensburg HR B 3135
USt.-IdNr.: DE151364101
IBAN: DE 3420080000721375000
SWIFT BIC: DRES DE FF
LCS-C842
Enhanced 10/100Base-TX
to 100Base-FX Media Converter
to 100Base-FX Media Converter
_________________________________________________________________________________________________________
The
LCS-C842
is a compact, reliable media conversion solution that provides network administrators with a cost-effective solution
for migrating or upgrading copper-based networks to fiber optic-based networks. Whether data is transmitted over multi-mode,
single mode or long-haul single mode fiber optics, or operating in full or half-duplex, the
single mode or long-haul single mode fiber optics, or operating in full or half-duplex, the
LCS-C842
is capable of handling the
various cable configurations.
Link Fault Signaling
- The LFS feature supports the creation of a redundant or secondary connection. This can be an ideal solution
for those mission-critical or constant service applications such as fiber To The Building (FTTB) or Fiber To The Curb (FTTC). The
LFS LED provides immediately indication of when a cable has been severed or when some other cause of disruption in service has
occurred. Simultaneously, data transmission will be switched to the redundant link resulting in 'non-stop' network connectivity.
LFS LED provides immediately indication of when a cable has been severed or when some other cause of disruption in service has
occurred. Simultaneously, data transmission will be switched to the redundant link resulting in 'non-stop' network connectivity.
Loopback Test
- Once enabled via a DIP-switch, the Remote or Local Loopback test feature allows the administrator to instantly
determine the status of the cable connection. This offers a simpler approach to troubleshooting; no more manual inspection of
cables and wiring closets.
cables and wiring closets.
Support NWay
- The
LCS-C842
takes advantage of intelligent connection technology to support auto-negotiation, thereby
eliminating the hassle of manually configuring or monitoring the settings. This ensures a plug-n-play' operability.
Cable Flexibility & Scalability
- The
LCS-C842
allows you to install fiber cabling anywhere within the network diagram without
having to replace existing copper-based. It's compact, modular design facilitates easy deployment in a narrow desktop location,
wall-mount or as a multi-unit configuration based on the
wall-mount or as a multi-unit configuration based on the
LCS-C819
12-slot standard 19" rack-mount chassis. Plus, connecting the
LCS-C842
media converter to fiber segments extends distances between networking nodes of up to 60,000 meters.
Device DIP switches allow multiple configuration options
Automatic MDI/MDI-X selection on RJ-45 port
Auto-negotiation, NWay support on RJ-45
Link Fault Signalling (LFS)
Remote and local loop back test
LEDs for at-a-glance device status
Extends distances ranging from 2km (multi-mode fiber) to 60km (single mode fiber)
Store-and-forward at full wire speed
Internal and external power supply options
FCC Class A & CE approved
Automatic MDI/MDI-X selection on RJ-45 port
Auto-negotiation, NWay support on RJ-45
Link Fault Signalling (LFS)
Remote and local loop back test
LEDs for at-a-glance device status
Extends distances ranging from 2km (multi-mode fiber) to 60km (single mode fiber)
Store-and-forward at full wire speed
Internal and external power supply options
FCC Class A & CE approved
Standard:
IEEE 802.3 (10BASE-T Ethernet);
IEEE 802.3u (100BASE-TX/FX Fast Ethernet)
IEEE 802.3u (100BASE-TX/FX Fast Ethernet)
Ports:
1 x copper;1 x fiber optic
Interfaces:
UTP 100/120ohm; RJ-45 type
Fiber optic connector:
SC, ST, LC, MT-RJ or WDM types (only SC type for single mode)
Max. Distance:
UTP: 100 meters (Category 3/4/5 or better)
Fiber: 2,000 meters, (62.5/125 micron fiber cabling)
20,000 meters, (9/125 micron fiber cabling)
40,000 meters, (9/125 micron fiber cabling)
60,000 meters,(9/125 micron fiber cabling
Fiber: 2,000 meters, (62.5/125 micron fiber cabling)
20,000 meters, (9/125 micron fiber cabling)
40,000 meters, (9/125 micron fiber cabling)
60,000 meters,(9/125 micron fiber cabling
Unit LED:
100: Green, LFS: Red, LNK: Green, ACT: Green, FDX: Amber, COL: Amber, PWR: Green,
Power:
AC power adapter; 12V DC @ 0.8A Frequency: 47Hz to 63Hz
Environment:
Operating: Temperature: 0°C to 50°C Relative Humidity: 10% to 80%, Non-condensing
Emissions:
FCC Part 15 of Class A & CE approved
Weight: 158g
Dimensions:
Dimensions:
86 x 133.5 x 29mm (Width x Depth x Height)
LCS-C842MT:
Enhanced 10/100Base-TX to 100Base-FX Multi-mode Media Converter (ST Connector)
LCS-C842MC:
Enhanced 10/100Base-TX to100Base-FX Multi-mode Media Converter (SC Connector)
LCS-C842TS-20/40 (km):
Enhanced 10/100Base-TX to 100Base-FX Single Fiber Media Converter, (WDM Connector) Transmitter
LCS-C842RS-20/40 (km):
Enhanced 10/100Base-TX to 100Base-FX Single Fiber Media Converter, (WDM Connector) Receiver