Longshine LCS-C842MC Leaflet

♦ 
♦ 
♦ 
♦ 
♦ 
♦ 
♦ 
♦ 
♦ 
♦ 

 Enhanced 10/100Base-TX to 100Base-FX Single Mode Media Converter (SC Connector) 

Geschäftsführer: 

Dresdner Bank AG 

 

Registergericht: 

St.-Nr.: 30 292 087 98 

Dr. Rong-Jye Lu 

BLZ 200 800 00, Kto.-Nr. 7 211 375 00 

Ahrensburg HR B 3135 

USt.-IdNr.: DE151364101 

 

IBAN: DE 3420080000721375000   

SWIFT BIC: DRES DE FF 

 

The 

 is a compact, reliable media conversion solution that provides network administrators with a cost-effective solution 

for migrating or upgrading copper-based networks to fiber optic-based networks. Whether data is transmitted over multi-mode, 
single mode or long-haul single mode fiber optics, or operating in full or half-duplex, the 

 is capable of handling the 

various cable configurations.  

 - The LFS feature supports the creation of a redundant or secondary connection. This can be an ideal solution 

for those mission-critical or constant service applications such as fiber To The Building (FTTB) or Fiber To The Curb (FTTC). The 
LFS LED provides immediately indication of when a cable has been severed or when some other cause of disruption in service has 
occurred. Simultaneously, data transmission will be switched to the redundant link resulting in 'non-stop' network connectivity. 

 - Once enabled via a DIP-switch, the Remote or Local Loopback test feature allows the administrator to instantly 

determine the status of the cable connection. This offers a simpler approach to troubleshooting; no more manual inspection of 
cables and wiring closets. 

 - The 

 takes advantage of intelligent connection technology to support auto-negotiation, thereby 

eliminating the hassle of manually configuring or monitoring the settings. This ensures a plug-n-play' operability. 

 - The 

 allows you to install fiber cabling anywhere within the network diagram without 

having to replace existing copper-based. It's compact, modular design facilitates easy deployment in a narrow desktop location, 
wall-mount or as a multi-unit configuration based on the 

 12-slot standard 19" rack-mount chassis. Plus, connecting the 

 media converter to fiber segments extends distances between networking nodes of up to 60,000 meters. 

 

Device DIP switches allow multiple configuration options 
Automatic MDI/MDI-X selection on RJ-45 port 
Auto-negotiation, NWay support on RJ-45 
Link Fault Signalling (LFS) 
Remote and local loop back test 
LEDs for at-a-glance device status 
Extends distances ranging from 2km (multi-mode fiber) to 60km (single mode fiber) 
Store-and-forward at full wire speed 
Internal and external power supply options 
FCC Class A & CE approved 

Standard: 

IEEE 802.3 (10BASE-T Ethernet); 
IEEE 802.3u (100BASE-TX/FX Fast Ethernet)

Ports:

1 x copper;1 x fiber optic

Interfaces:

UTP 100/120ohm; RJ-45 type

Fiber optic connector:

SC, ST, LC, MT-RJ or WDM types (only SC type for single mode)

Max. Distance:

UTP: 100 meters (Category 3/4/5 or better) 
Fiber: 2,000 meters, (62.5/125 micron fiber cabling) 
20,000 meters, (9/125 micron fiber cabling) 
40,000 meters, (9/125 micron fiber cabling) 
60,000 meters,(9/125 micron fiber cabling

Unit LED:

100: Green, LFS: Red, LNK: Green, ACT: Green, FDX: Amber, COL: Amber, PWR: Green,

Power:

AC power adapter; 12V DC @ 0.8A Frequency: 47Hz to 63Hz

Environment:

Operating: Temperature: 0°C to 50°C Relative Humidity: 10% to 80%, Non-condensing

Emissions:

FCC Part 15 of Class A & CE approved

Weight: 158g 
Dimensions:

86 x 133.5 x 29mm (Width x Depth x Height)

 Enhanced 10/100Base-TX to 100Base-FX Multi-mode Media Converter (ST Connector) 

 Enhanced 10/100Base-TX to100Base-FX Multi-mode Media Converter (SC Connector) 

 Enhanced 10/100Base-TX to 100Base-FX Single Fiber Media Converter, (WDM Connector) Transmitter 

 Enhanced 10/100Base-TX to 100Base-FX Single Fiber Media Converter, (WDM Connector) Receiver