Microsoft Corporation RM-200 User Manual

Warning: Use only batteries, chargers, and enhancements approved by 
Nokia for use with this particular model. The use of any other types may 
invalidate any approval or warranty, and may be dangerous.

For availability of approved enhancements, please check with your dealer. When 
you disconnect the power cord of any enhancement, grasp and pull the plug, not 
the cord.

1. Connect the charger to a wall outlet.

2. Connect the plug from the charger 

into the jack on the bottom of your 
phone.  The CA-44 charging adapter 
(not provided with the phone), can be 
used with older charger models.

If the battery is completely discharged, it may take a few minutes 
before the charging indicator appears on the display or before any 
calls can be made.

The charging time depends on the charger and the battery used. For 
example, charging a BP-6M Li-Ion battery with the AC-4 charger takes 
about 1 hour and 55 minutes while the phone is in the standby mode.

■ Switch the phone on and off

Warning: Do not switch the phone on when wireless phone use is 
prohibited or when it may cause interference or danger.

Press and hold the power key as shown.

If the phone asks for a PIN or UPIN code, enter the code, 
and select 

.

You can switch on the phone without a SIM card 
inserted. 

Enter the local time, select the time zone of your 
location in terms of the time difference with respect to 
Greenwich Mean Time (GMT), and enter the date. See “Time and date,” 
p. 48.