Microsoft Corporation RM-200 User Manual

Do not point the IR (infrared) beam at anyone's eye or allow it to interfere with 
other IR devices. This device is a Class 1 laser product.

When sending or receiving data, ensure that the IR ports of the sending 
and receiving devices are pointing at each other and that there are no 
obstructions between the devices.

To activate the IR port of your phone, select 

> 

> 

> 

.

To deactivate the IR connection, select 

> 

> 

> 

. When the phone displays 

, 

select 

.

If data transfer is not started within 2 minutes after the activation of 
the IR port, the connection is canceled and must be started again.

When 

 is shown continuously, the IR connection is activated, and 

your phone is ready to send or receive data through its IR port.

When 

 blinks, your phone is trying to connect to the other device, or 

a connection has been lost.

WCDMA and general packet radio service (GPRS) are network services 
that allow mobile phones to send and receive data over an Internet  
protocol (IP)-based network. WCDMA and GPRS  are data bearers that 
enable wireless access to data networks such as the Internet.

Enhanced GPRS (EGPRS) is similar to GPRS but enables faster 
connections. For more information on availability of EGPRS and data 
transfer speed, contact your network operator or service provider.

The applications that may use WCDMA or (E)GPRS are MMS, video 
streaming, browsing sessions,  remote SyncML, Java application 
downloading, and the PC dial-up.

When you have selected GPRS as a data bearer, the phone uses EGPRS 
instead of GPRS if this is available in the network. You cannot select 
between EGPRS and GPRS, but for some applications you may be able to 
select GPRS or 

 (circuit switched data, CSD).