D-Link Corporation IR627A1 User Manual

D-Link DIR-627 User Manual

Section 2 - Installation

If you are connecting the Router to a cable/DSL/satellite modem, please follow the steps below:

1. Place the Router in an open and central location. Do not plug the power adapter into the Router.

2. Turn the power off on your modem. If there is no on/off switch, then unplug the modem’s power adapter. Shut down

your computer.

3. Unplug the Ethernet cable (that connects your computer to your modem) from your computer and place it into the

WAN port on the Router.

4. Plug an Ethernet cable into one of the four LAN ports on the Router. Plug the other end into the Ethernet port on

your computer.

5. Turn on or plug in your modem. Wait for the modem to boot (about 30 seconds).

6. Plug the power adapter to the Router and connect to an outlet or power strip. Wait about 30 seconds for the Router

to boot.

7. Turn on your computer.

8. Verify the link lights on the Router. The power light, WAN light, and the LAN light (the port that your computer is

plugged into) should be lit. If not, make sure your computer, modem, and Router are powered on and verify the

cable connections are correct.

Connect to Cable/DSL/Satellite Modem