IBM Intel Xeon E5606 49Y3775 User Manual

135

will accept lower bit rates from a host according to timing negotiation specifications. 
What follows is a processor-specific PECI client definition. PECI commands listed in 

 apply to Intel Xeon processor 5600 series only.

1.

Refer to 

 for a summary of mailbox commands supported by the Intel Xeon processor 5600 

series.

Intel Xeon processor 5600 series acting as PECI clients support the following sideband 
functions:

• Processor and DRAM thermal management
• Platform manageability functions including thermal, power and electrical error 

monitoring

• Processor interface tuning and diagnostics capabilities (Intel® IBIST).

Processor fan speed control is managed by comparing PECI thermal readings against 
the processor-specific fan speed control reference point, or T

CONTROL

. Both T

CONTROL

 

and PECI thermal readings are accessible via the processor PECI client. These variables 
are referenced to a common temperature, the TCC activation point, and are both 
defined as negative offsets from that reference.

PECI-based access to DRAM thermal readings and throttling control coefficients provide 
a means for Board Management Controllers (BMCs) or other platform management 
devices to feed hints into on-die memory controller throttling algorithms. These control 
coefficients are accessible using PCI configuration space writes via PECI. The PECI-
based configuration write functionality is defined in 

, and the DRAM 

throttling coefficient control functions are documented in the Intel® Xeon® Processor 
5600 Series Datasheet, Volume 2.

PECI allows full read access to error and status monitoring registers within the 
processor’s PCI configuration space. It also provides insight into thermal monitoring 
functions such as TCC activation timers and thermal error logs.

The exact list of RAS-related registers in the PCI configuration space can be found in 
the Intel® Xeon® Processor 5600 Series Datasheet, Volume 2.

Ping()

Yes

GetDIB()

Yes

GetTemp()

Yes

PCIConfigRd()

Yes

PCIConfigWr()

Yes

MbxSend()

 1

Yes

MbxGet() 

1

Yes