Honeywell International Inc. 480628-4096 User Manual
Installation for MS-DOS
Setup the WaveCAD Program
Setup the WaveCAD Program
D-8
WaveLAN IEEE 802.11 PC Card User’s Guide
— When your computer has a memory manager program
installed, for example “
EMM386.EXE
”, you must exclude the
Memory Address space that you assigned to the
WaveCAD program in the previous step (see page D-6).
WaveCAD program in the previous step (see page D-6).
To exclude the Memory Space address, you must add an
exclude parameter to “
exclude parameter to “
DEVICE
” statement that activates the
memory manager program.
For example, if your computer uses the “
EMM386.EXE
”
memory manager program, your “
DEVICE
” statement could
look as follows:
DEVICE=c:\dos\emm386.exe noems x=d100-d1ff
— When your computer runs Microsoft Windows 3.x, you
must also edit the Windows “
SYSTEM.INI
” to protect the
Memory Address space that you assigned to the
WaveCAD program in the previous step (see page D-6).
You can use any ASCII text editor, such as Windows
Notepad to edit the “
WaveCAD program in the previous step (see page D-6).
You can use any ASCII text editor, such as Windows
Notepad to edit the “
SYSTEM.INI
” file and add the following
statement to the section “
386Enh
”:
Example:
= [386Enh] ... EMMExclude=D100-D1FF