Honeywell International Inc. 480628-4096 User Manual
Installation for MS-DOS
Setup the WaveLAN Parameters
Setup the WaveLAN Parameters
D-12
WaveLAN IEEE 802.11 PC Card User’s Guide
3 Transmit_Rate
1
Controls the data rate at which your
WaveLAN card will transmit its data.
WaveLAN card will transmit its data.
Valid Values:
1.
Fixed Low
2.
Fixed Standard
3.
Auto Select High-Medium-Standard-
Low (default).
Low (default).
4.
Fixed Medium (Turbo cards only)
5.
Fixed High (Turbo cards only)
6.
Auto Select Standard-Low
7.
Auto Select Medium-Standard-Low
4a Card Power
Management
Management
Enables/disables Power Management
Valid Values:
■
Y - Yes, enable Power Management
■
N - No, disable Power Management
(=default).
(=default).
When enabling Power Management you will
also need to set the
Maximum_Sleep_Duration, and
Receive_All_Multicasts parameter.
also need to set the
Maximum_Sleep_Duration, and
Receive_All_Multicasts parameter.
When you disable Power Managment,
these two parameters will be disabled as
well.
these two parameters will be disabled as
well.
4b Maximum Sleep
Duration
Duration
This parameter specifies the maximum time
the station is allowed to spend
consecutively in DOZE state.
the station is allowed to spend
consecutively in DOZE state.
Valid Values: any numerical value in the
range of 1-65535 (default value is 100).
range of 1-65535 (default value is 100).
This parameter determines the Listen
Interval of the station’s Power Management
scheme.
Interval of the station’s Power Management
scheme.
If 4a Card Power Management is disabled,
this parameter will be ignored
this parameter will be ignored
Table D-2
WaveLAN DOS ODI Driver Parameters—Continued