Longshine LCS-C842SC Leaflet
www.longshine.de sales@longshine.de
LCS-C842SC
Mediaconverter
10/100Mbit/s to
100Mbit/s FX
Single Mode up to 30Km
10/100Mbit/s to
100Mbit/s FX
Single Mode up to 30Km
The
LCS-C842SC is the solution for converting your media from copper to fiber optics. The converter
is enhanced with Link Fault Signaling (LFS) and Loopback Test (LBK) functions to offer the most
comprehensive network status monitoring and connection diagnostics. It is designed for large
workgroups who demand higher speed and wider bandwidth. It allows migration and expansion from a
copper-based Ethernet to a fiber optic Fast Ethernet up to 30Km.
comprehensive network status monitoring and connection diagnostics. It is designed for large
workgroups who demand higher speed and wider bandwidth. It allows migration and expansion from a
copper-based Ethernet to a fiber optic Fast Ethernet up to 30Km.
Link Fault Signaliung:
LFS LED will immediately light to indicate when a cable has been severed or
when some other cause of disruption in service has occurred. The LFS function monitors both copper
and fiber segments giving a total connection status report.
and fiber segments giving a total connection status report.
Loopback Test:
This Converter features DIP switches to activate both local and remote loopback
diagnostic test functions.
Features:
♦
Supports Auto MDI/MDI-X for RJ-45 Port
♦
Auto-negotation at full full speed
♦
Dip Switch to enable/disable Auto-
Negotation
Negotation
♦
Link Fault Signaling
♦
Loopback Test
♦
Half/Full duplex mode selction
♦
Remote and local Test
♦
Compatible with other 10Base-T and
100Base-TX/FX devices
100Base-TX/FX devices
♦
Extends distances up to 30Km
♦
Status LED for fast Diagnostics
Specifications:
Standard:
IEEE 802.3, IEEE 802.3u
Interface:
1 x SC Fiber 100Mbit/s
1 x RJ-45 with 10/100Mbit/s
1 x RJ-45 with 10/100Mbit/s
Data Rates:
UTP: 10 – 100Mbit/s
Fiber: 100Mbit/s
Fiber: 100Mbit/s
Max. Distance:
UTP: 100meters (CAT3/4/5)
Fiber: 30Km SingleMode
Fiber: 30Km SingleMode
Dip Switches:
DIP 1 - Auto-negotiation (RJ-45)
DIP 2 - Copper port duplex mode
DIP 3 - Copper port data bit rate
DIP 4 - Fiber port duplex mode
DIP 5 - Link Fault Signaling (LFS)
DIP 6 - Local Loop Back (LLB)
DIP 7 - Remote Loop Back (RLB)
DIP 2 - Copper port duplex mode
DIP 3 - Copper port data bit rate
DIP 4 - Fiber port duplex mode
DIP 5 - Link Fault Signaling (LFS)
DIP 6 - Local Loop Back (LLB)
DIP 7 - Remote Loop Back (RLB)
Power Supply:
External Power Supply, 12V DC / 800 mA
Certificate:
FCC Part 15 of Class A & CE approved
Operating Enviroment:
Temperature 0°C – 50°C
Humidity 10% - 80% (non-condensing)
Humidity 10% - 80% (non-condensing)
Dimensions:
109.2 x 90 x 30mm, 280Gr
Box contains:
One Converter, Power Supply, CD with Manual/Software, Rubber Feets
EAN:
4016621003449