Comtrend Corporation AR-5381U User Manual
101
IPSec Connection Name
User-defined label
Tunnel Mode
Select tunnel protocol, AH (Authentication
Header) or ESP (Encapsulating Security
Header) or ESP (Encapsulating Security
Payload) for this tunnel.
Remote IPSec Gateway Address
The location of the Remote IPSec Gateway. IP
address or domain name can be used.
address or domain name can be used.
Tunnel access from local IP
addresses
addresses
Specify the acceptable host IP on the local
side. Choose Single or Subnet.
side. Choose Single or Subnet.
IP Address/Subnet Mask for VPN
If you chose Single, please enter the host IP
address for VPN. If you chose Subnet, please
enter the subnet information for VPN.
enter the subnet information for VPN.
Tunnel access from remote IP
addresses
Specify the acceptable host IP on the remote
side. Choose Single or Subnet.
IP Address/Subnet Mask for VPN
If you chose Single, please enter the host IP
address for VPN. If you chose Subnet, please
address for VPN. If you chose Subnet, please
enter the subnet information for VPN.
Key Exchange Method
Select from Auto(IKE) or Manual
For the Auto(IKE) key exchange method, select Pre-shared key or Certificate (X.509)
authentication. For Pre-shared key authentication you must enter a key, while for
authentication. For Pre-shared key authentication you must enter a key, while for
Certificate (X.509) authentication you must select a certificate from the list.
See the tables below for a summary of all available options.