Canon i550 7819A005 User Manual
Product codes
7819A005
Appendix
51
Maintaining the printer
Maintaining the printer
Maintaining the printer
Maintaining the printer
Do not attempt to disassemble or modify the printer. There are no user serviceable parts inside
Do not attempt to disassemble or modify the printer. There are no user serviceable parts inside
Do not attempt to disassemble or modify the printer. There are no user serviceable parts inside
Do not attempt to disassemble or modify the printer. There are no user serviceable parts inside
the printer.
the printer.
the printer.
the printer.
the printer.
The printer contains high-voltage components. Never attempt any maintenance procedure not
described in this guide.
described in this guide.
Caution
You may cause injury or damage the printer if you ignore any of
these safety precautions.
these safety precautions.
Choosing a location
Choosing a location
Choosing a location
Choosing a location
Do not install the printer in a location that is unstable or subject to excessive vibration.
Do not install the printer in a location that is unstable or subject to excessive vibration.
Do not install the printer in a location that is unstable or subject to excessive vibration.
Do not install the printer in a location that is unstable or subject to excessive vibration.
Do not install the printer in locations that are very humid or dusty, in direct sunlight, outdoors, or
Do not install the printer in locations that are very humid or dusty, in direct sunlight, outdoors, or
Do not install the printer in locations that are very humid or dusty, in direct sunlight, outdoors, or
Do not install the printer in locations that are very humid or dusty, in direct sunlight, outdoors, or
close to a heating source.
close to a heating source.
close to a heating source.
close to a heating source.
close to a heating source.
To avoid the risk of fire or electric shocks, install the printer in a location with an ambient
temperature range of 5°C to 35°C (41°F to 95°F) and humidity of 10% to 90% (condensation free).
To avoid the risk of fire or electric shocks, install the printer in a location with an ambient
temperature range of 5°C to 35°C (41°F to 95°F) and humidity of 10% to 90% (condensation free).
Do not place the printer on a thick rug or carpet.
Do not place the printer on a thick rug or carpet.
Do not place the printer on a thick rug or carpet.
Do not place the printer on a thick rug or carpet.
Ensure that the area around the power outlet is kept clear at all times so you
Ensure that the area around the power outlet is kept clear at all times so you
Ensure that the area around the power outlet is kept clear at all times so you
Ensure that the area around the power outlet is kept clear at all times so you
can easily unplug the power cord if necessary.
can easily unplug the power cord if necessary.
can easily unplug the power cord if necessary.
can easily unplug the power cord if necessary.
can easily unplug the power cord if necessary.
When moving the printer, carry the printer at both ends.
When moving the printer, carry the printer at both ends.
When moving the printer, carry the printer at both ends.
When moving the printer, carry the printer at both ends.
Power supply
Power supply
Power supply
Power supply
Never remove the plug by pulling on the cord.
Never remove the plug by pulling on the cord.
Never remove the plug by pulling on the cord.
Never remove the plug by pulling on the cord.
Do not use an extension lead/ cord.
Do not use an extension lead/ cord.
Do not use an extension lead/ cord.
Do not use an extension lead/ cord.
Never use a power supply voltage other than that supplied in the country of purchase.
Never use a power supply voltage other than that supplied in the country of purchase.
Never use a power supply voltage other than that supplied in the country of purchase.
Never use a power supply voltage other than that supplied in the country of purchase.
The correct power supply voltage and frequency is as follows:
The correct power supply voltage and frequency is as follows:
Europe:
Europe:
Europe:
Europe: AC 230V ± 10M%, 50Hz
USA/Canada:
USA/Canada:
USA/Canada:
USA/Canada:
USA/Canada: AC 120V, 60Hz
Australia:
Australia:
Australia:
Australia:
Australia: AC 240V, 50Hz
Working around the
Working around the
Working around the
Working around the
printer
printer
printer
printer
printer
Never put your hands or fingers in the printer while it is printing.
Never put your hands or fingers in the printer while it is printing.
Never put your hands or fingers in the printer while it is printing.
Never put your hands or fingers in the printer while it is printing.
Do not place metal objects (paper clips, staples, etc.) or containers of flammable solvents
Do not place metal objects (paper clips, staples, etc.) or containers of flammable solvents
Do not place metal objects (paper clips, staples, etc.) or containers of flammable solvents
Do not place metal objects (paper clips, staples, etc.) or containers of flammable solvents
(alcohol, thinners. etc.) on top of the printer.
(alcohol, thinners. etc.) on top of the printer.
(alcohol, thinners. etc.) on top of the printer.
(alcohol, thinners. etc.) on top of the printer.
(alcohol, thinners. etc.) on top of the printer.
Print heads and ink tanks
Print heads and ink tanks
Print heads and ink tanks
Print heads and ink tanks For safety reasons store print heads and ink tanks out of the reach of small children.
For safety reasons store print heads and ink tanks out of the reach of small children.
For safety reasons store print heads and ink tanks out of the reach of small children.
For safety reasons store print heads and ink tanks out of the reach of small children.
If a child ingests any ink, consult a doctor immediately.
If a child ingests any ink, consult a doctor immediately.
Do not shake print heads or ink tanks.
Do not shake print heads or ink tanks.
Do not shake print heads or ink tanks.
Do not shake print heads or ink tanks.
Ink may leak out and stain clothing or the surrounding area.
Ink may leak out and stain clothing or the surrounding area.
Never touch the electrical contacts on a print head after printing.
Never touch the electrical contacts on a print head after printing.
Never touch the electrical contacts on a print head after printing.
Never touch the electrical contacts on a print head after printing.
The metal parts may be very hot and could cause burns.
The metal parts may be very hot and could cause burns.