Sagem Wireless MA110 User Manual
Tamper switch management feature is configured by setting the key
app/tamper alarm/level to an appropriate value.
app/tamper alarm/level to an appropriate value.
Tamper Alarm Level
app/tamper alarm/level
0 No Alarm.
1 Send Alarm (No Sound Alarm).
2 Send Alarm and Activates Buzzer (Sound Alarm)
0-2
The key app/failure ID/alarm ID defines the value of the alarm ID to send
in Wiegand or Dataclock. This ID permits to distinguish between an user
ID and a error ID.
in Wiegand or Dataclock. This ID permits to distinguish between an user
ID and a error ID.
Tamper Alarm Level
app/failure ID/alarm ID
0- 65535
In Wiegand and Dataclock the alarm ID is sent like other Failure IDs, see
the documentation MA100 Series Remote Messages Specification for a
description of the packet format in UDP and RS-485.
the documentation MA100 Series Remote Messages Specification for a
description of the packet format in UDP and RS-485.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
s
s
Example 1: Send an alarm ID (62221) in Wiegand, and play sound
warning, in case of intrusion detection.
warning, in case of intrusion detection.
To send an alarm in Wiegand, the key app/send ID wiegand/enabled must
be set to 1.and the key app/tamper alarm/level must be set to 2 (alarm and
buzzer.)
be set to 1.and the key app/tamper alarm/level must be set to 2 (alarm and
buzzer.)
The key app/failure ID/alarm ID must be set to 62221 to link the intrusion
event to this identifier.
event to this identifier.
Example 2: Send an alarm in UDP quietly in case of intrusion
detection.
detection.
To send an alarm in UDP, the key app/send ID UDP/enabled must be set
to 1.
to 1.
Then the key app/tamper alarm/level must be set to 1 (quiet alarm.)
38
SAGEM Défense Sécurité document. Reproduction and disclosure forbidden