Compex CPX-05-WLM54G User Manual
3.
The first page of Setup Wizard is
an overview of the basic setup.
••••
Internet Connection
This functionality lets you specify the type
of Internet Connection you want to use.
••••
Wireless Setup
This functionality lets you configure the
settings of the gateway to suit your
wireless network.
••••
USB Device
This functionality gives you a quick
glimpse of the summary on the USB
devices that are connected to the gateway.
••••
NetPassage Settings
This functionality lets you identify the gateway and create a workgroup for the gateway.
It also lets you set up the time zone of the locale.
NOTE
For more details, please refer to User’s Manual. Alternatively,
refer to
Help on the right side of the main page here.
4.
To setup your WAN connection,
select the following types of
Internet Connection such as:
••••
Static IP
For configuring
Static IP, you need
to manually enter IP Address,
Network Mask and Gateway IP
Address that are provided by your
ISP.
••••
Dynamic IP ( used as an
example in this guide)
••••
PPPoE
For configuring
PPPoE , you have
to enter Username and Password
that are provided by your ISP.
••••
PPTP
For configuring
PPTP , you have to
enter Username, Password,
Network Mask and VPN Server that
are provided by your ISP. Take
note that VPN Server is the IP of
your ISP PPTP server.
To proceed, click on the
Next button.
For configuring Static IP address
For configuring PPPoE
For configuring PPTP
5.
To configure the following
parameters:
••••
SSID
The default SSID is ‘compex’. Click
on the
Change button to enter your
preferred SSID name.
Remember to change your wireless
clients’ settings illustrated in Section
5 after NetPassage 28G has
rebooted and the new SSID has
taken effect.
••••
Channel
Click on the down-arrow button next
to
Channel. From the list, select
your preferred wireless network
channel.
••••
Security Mode
You may choose to
disable, enable
WEP or enable WPA-PSK to secure
the wireless connection.
If
WEP is enabled, select Hex or
Ascii for the key string type to be
used. Then key in the transmission
key.
If
WPA-PSK is enabled, select Hex
or Ascii for the key string type to be
used. The default
WPA-PSK is
‘11111111’. The default GTK
update is ‘600’.
To proceed, click on the
Next button.
6.
Then the Wizard will detect if any
of the USB devices such as printer,
storage disk or webcam are
connected to NetPassage 28G.
For more details on setting up USB
devices, refer to User’s Manual.
If you want to allow access to your
storage disk via Internet, click
Yes. Then
you will be prompted to enter the
following data :
•
System Name
The default name is ‘ROUTER’ so
you may change it if you wish. So
create a better name to identify
your gateway.
•
NetBios Name
The default name is ‘router’ so you
may change it if you wish. This
name for NetPassage 28G will
appear when you browse the MS
Windows Network Neighbourhood.
••••
Workgroup
The default name is ‘mygroup’. If
you wish, create an appropriate
name for the workgroup of your
gateway.
••••
Time Zone
Set up the time zone of this locale.
To proceed, click on the
Next button.
7.
You will see the summary of NetPassage 28G setup appear for your viewing.
Check if the settings such as WAN IP Address, etc are correct.
8.
Click on the
Finish button to save the settings and reboot NetPassage 28G.
9.
You will be returned to the Login page after 30 seconds. Alternatively, you can
repeat Step 1.
Further Information References
If you have other Windows operating systems or broadband Internet accounts, please
refer to the User’s Manual in the accompanying Product CD.
This document may become superseded, in which case you may find its latest version
at:
http://www.compex.com.sg/prodspec.asp?f=Manual&s=1
10. Schematic Overview of the NetPassage 28G