Sony VPL-EW130 User Manual

Page of 3
Front Exhaust
With a front exhaust system, users sitting behind the
projector are not affected by expelled hot air and fan
noise.
HD Ready
HMDI input means the VPL-EW130 is HD ready.
Easy to operate control panel layout
The VPL-EW130’s control panel is on top of the device
for easy operation, with large, easy-to-locate controls.
Built-in upward beam angle and keystone
adjustment
Normally, the front angle of a projector has to be ad-
justed to raise the beam to the screen. In the VPL-
EW130, this initial adjustment is built-in and includes
a corresponding keystone adjustment, saving two
setup stages.
Automatic Keystone Adjustment
The projector can detect keystone distortion and can
correct it automatically. (Note that since this is an
electronic correction, it will reduce the picture quality
slightly).
Smart APA (Auto Pixel Alignment)
When a computer is used as a picture source, APA
automatically optimises Phase, Pitch and Shift values.
These can also be adjusted manually.
Auto Input Search
Auto Input Search detects which input has an incom-
ing signal, and automatically switches to it. This
makes it easier for users to set up the projector prior
to making a presentation.
Picture Muting
If the picture needs to be turned off, all it takes is a
single button-press on the remote control. This will
mute audio at the same time. There is also a separate
“mute audio” button for audio-only muting.
Audio switcher facility
To avoid the need for a separate audio switcher, the
projector can be used to select between two audio
sources, routing them via a variable audio output to
the room amplification system.
Picture Freeze Function
Picture Freeze is useful during presentations if you
need to look at other material on your PC’s screen
without the viewing audience being aware. Freeze the
current image, and you can use your PC independ-
ently of the display from the projector.
Digital Zoom
With Digital Zoom, if you are displaying a computer-
sourced image, you can enlarge a selected area of the
screen image up to four times.
Off and Go
At the end of a presentation, you can turn off the
power supply to the projector immediately, instead of
going through a ‘power down’ cycle.
Direct Power On/Off
With this function, there is no need to go through
‘Standby’ mode when powering up the projector. The
projector can be set to activate as soon as power is
applied.
Filter replaced at the same time as lamp
The filter only needs to be changed when a new lamp
is fitted, potentially halving disruption due to
maintenance.
Multiple Picture Modes
The VPL-EW130 has six picture modes (Dynamic,
Standard, Game, Living, Cinema and Presentation)
that can be selected to suite the nature of the source
material.
Built-in security measures
The VPL-EW130 has a package of security measures,
including password protection, and physical anti-theft
anchor points.
Technical Specifications
Display system
3 LCD system
Display device
Size of effective display
area
0.59” (15.0 mm) x 3,
BrightEra, Aspect ratio:
16:10
Number of pixels
3,072,000 (1280 x 800 x 3)
pixels
Projection lens
Zoom
Manual (Approx. 1.3 x)
Focus
Manual
Ultra High Pressure lamp
210 W type
Recommended lamp re-
placement time*1
3000 H / 4500 H / 6000 H
(Lamp mode: High / Stand-
ard / Low)
Filter cleaning cycle
Max. 6000 H*1 / Same time
as the lamp replacement is
recommended
Screen size
25” to 200” (0.635 m to
5.08 m)
Light output (Lamp
mode: High / Standard /
Low)
3000 lm / 2300 lm / 1800
lm
VPL-EW130
www.pro.sony.eu/projectors
2