Sierra Wireless MC7354B User Manual
4117529
Rev 1.0
June 12, 2015
8
2. Power Interface
2.1.
Power Supply
The host device must provide power to the MC7354B mini card over pins 2, 24, 39, 41 and 52 (VCC)
as detailed in the following table.
as detailed in the following table.
Table 1.
Power Supply Requirements
Signal
Name
Name
Pin
Specification
Minimum
Typical
Maximum
Unit
VCC
2, 24, 39, 41, 52
Voltage range
3.0
3.3
3.6
V
Ripple voltage
-
-
100
mVpp
GND
4, 9, 15, 18, 21,
26, 27, 29, 34, 35,
37, 40, 43, 50
26, 27, 29, 34, 35,
37, 40, 43, 50
-
-
0
-
V
Note:
The host must provide safe and continuous power at all times; the module does not have an
independent power supply, or protection circuits to guard against electrical issues.
independent power supply, or protection circuits to guard against electrical issues.
2.2.
Electrostatic Discharge (ESD)
The OEM is responsible for ensuring that the Mini Card host interface pins are not exposed to ESD
during handling or normal operation.
during handling or normal operation.
Note:
The level of protection required depends on your application.
Table 2.
ESD Specifications
Connection
Specification
Operational
The RF port (antenna launch and RF connector) complies with the IEC 61000-4-2
standard:
standard:
Electrostatic Discharge Immunity:
Test: Level3
Contact Discharge: ±6 kV
Air Discharge: ±8 kV
Non-operational
The host connector Interface complies with the following standard only:
±2 kV Human Body Model (JESD22-A114-B)