D&H Global Enterprise LLC OBEE00 User Manual

1 License

Global Enterprise LLC., under the Creative Commons Attribution-Share Alike 3.0 Un-

ported License, which is available at:

http://creativecommons.org/licenses/by-sa/3.0/
or send a letter to::

Creative Commons
171 Second Street
Suite 300
San Francisco, California 94105 USA

All Adaptations are to be attributed to D&H Global Enterprise, LLC. Any Adaptations

must carry prominent notices stating that You have modified the Work. You must keep

intact all copyright and trademark notices that refer to this Work, and the disclaimer

of warranties that is included in the License to this Work. “Product” is defined as an

entire, or any part of a, device built using this Work or the modified Work. Any Product

derived from this Work or an Adaptation of this Work must be legibly and clearly marked

on the silkscreen of the printed circuit board "Based on original design by D&H Global

Enterprise LLC." For any questions, concerns, or issues submit them to:

2 Overview

This manual describes the hardware of the OBee module running ONE-NET firmware.

2.1 Summary

The OBee is an Open Hardware module running the Open-Source ONE-NET protocol.

The OBee designed to operate in the 916MHz ISM band of the United States. With the

ONE-NET firmware, the OBee is capable of ONE-NET’s star, P2P, or mesh configura-

tions. The OBee has the footprint and pinout of other common ISM radio modules and

has similar configuration methods through its serial connection.

2.2 Certifications

The OBee carries a modular certification from the United States’ FCC. See the Agency

Certifications sections for more details.