Cross Point b.v. CP301MAXRXA User Manual
Technical Manual AM Systems
Connections
v4.4
Page 21 of 72
Leave at least 10cm of free space around the PSU for ventilation purposes
Allow for free air flow around the PSU
Local laws and regulations must be respected when installing and servicing this
device
device
Minimum distance between PSU and AM system is 1m.
It is prohibited to connect more than one TRX to a power supply. Use a
separate power supply for each TRX antenna!
separate power supply for each TRX antenna!
Keeping the power supply principle in mind, the following power supply connections are
recommended:
recommended:
6.8.1
Power supply for a single system (mono)
In a single antenna system setup (1 or multiple transceivers), a power supply must be
connected to each individual TRX antenna. It is not possible to connect more than one
TRX to one power supply.
connected to each individual TRX antenna. It is not possible to connect more than one
TRX to one power supply.
Figure 9: Power supply connection: Single and multiple mono antennas
6.8.2
Power supply for a dual system
In a dual antenna system setup (1 TRX and 1 RX), a power supply must be connected to
each individual TRX antenna. It is not possible to connect more than one TRX to one
power supply.
each individual TRX antenna. It is not possible to connect more than one TRX to one
power supply.
TRX1
PSU
TRX2
PSU