Autostart SAW4 User Manual

P. 6 User 

Guide

 AS-1525 SH 

2. The parking lights will flash twice and the LED will turn off to confirm that the doors have 

been unlocked and that the Starter Kill feature is disarmed if it was installed. 

1. Press and hold the 

 button for approx. 1 sec. 

2. The parking lights will flash once and the LED will flash slowly to confirm that the doors have 

been locked and that the Starter Kill feature is enabled if it was installed. 

Priority Door Access 

When programmed, this safety feature lets you unlock solely the driver’s door with a single 

press of the 

 button on the transmitter; upon a second press of the 

 button, all the 

other doors will unlock. 

Arming the Starter Kill 

If installed, the Starter Kill can be programmed to arm in Active Mode (will not arm 

automatically) or in Passive Mode (will arm automatically). See p. 7 for more details on arming 

modes. 
•  To disarm the Starter Kill in Active or Passive Mode, press the 

 button on the trans-

mitter. The parking lights will flash twice. (If Remote Door Locks were installed, this will also 

unlock the doors.)   

•  To arm the Starter Kill in Active or Passive Mode, press and hold the 

 button on the 

transmitter. The parking lights will flash once. (If Remote Door Locks were installed, this will 

also lock the doors). In Passive Mode, the Starter Kill will automatically rearm 1 or 3 minutes 

after the doors were unlocked unless the ignition key has meanwhile been inserted in the 

ignition switch (if Key Sense is installed – see p. 8). 

This Unit was designed with flexibility and OEM integration in mind. With its programmable 

options, this unit can single-handedly control nearly any electrical system in your vehicle. 

Note: The programming of your system should be left to a professional. Changing any one 

of the settings may affect the operation of your Unit. 

•  Remote Door Locks 

•  Safe Start 

•  Starter Kill / Anti-grind feature 

•  Passive / active arming of the Starter 

Kill 

•  Idle Mode 

•  Ignition-controlled Door Locks 

•  Smart Ignition Locks  

•  Secure Lock 

•  Priority Door Access 

•  Remote Trunk Release 

•  Horn Confirmation (Panic 

Mode) 

•  Engine Run Time 

• 

Key Sense

 

• 

, 

 and 

 outputs 

•  Multi-car Operation 

Remote Door Locks Option 

If your system was installed with the Remote Door Locks option, you will have the convenience 

of remote keyless entry. See p. 5 for operation details. 

Safe Start  

If this feature is enabled, it will require the user press the 

 button 2 times within 3 seconds 

to remote-start the vehicle. If the Swap Start Mode is selected, to remote-start your vehicle 

press 

 and 

 simultaneously. 

This will eliminate accidental remote starts – for example: when there are children playing with 

the remote control. 
Under Safe Start, you can activate Cold Weather Mode by 

•  Pressing the 

 button, and then 

•  Pressing and holding the 

 button again until the parking lights flash 3 times.