Guillemot 5059946 User Manual

Page of 3
User Manual (ENGLISH)
1. Volume + 
 
 
 
8. Line input connector
2. Volume - 
 
 
 
9. Line output connector
3. Bluetooth® wireless technology button (blue/red) 
10. 5 V/1 A DC input Micro-USB port
4. Hands-free calling zone (the button is located 
11. 5 V/500 mA DC USB port (lets you 
underneath the base of the speaker) 
 
charge a smartphone)
5. Microphone 
 
 
 
12. Battery compartment cover
6. Battery level indicator (green/red) 
 
13. USB cable
7.                (OFF/ON/Mute) switch   
Charge completely before first use
Completely charge your WAE BTP03 before using it for the first time. When charging is complete, 
the battery level indicator (6) stays lit up in green. A full charge may take up to 11 hours.
1. Getting started with your WAE BTP03
To power on your device, set the switch (7) to ON.
When used for the first time, your WAE BTP03 is immediately ready for pairing, for up to 5 minutes: the 
Bluetooth® button (3) flashes blue and red. Afterwards, you can press the Bluetooth® button (3) to start 
the pairing process again.
- On your smartphone, digital music player or PC/Mac, enable the Bluetooth® feature, then search for 
devices within range.
- Select WAE-BTP03 in the list displayed and pair the devices (if an access code is required, enter 0000).
Once the devices are paired and connected, the Bluetooth® button (3) on your WAE BTP03 stays lit up in 
blue. You are now ready to play your music.
When a device is connected to the line input connector (8), no audio can be played via the 
Bluetooth® function and the Bluetooth® button (3) is not lit up. Simply disconnect the device from 
the line input connector (8) to be able to play music via the Bluetooth® function again.
2. Connecting two devices to your WAE BTP03 at the same time
Your WAE BTP03 features A2DP Multipoint technology, allowing you to pair and connect two 
smartphones/tablets simultaneously. When your WAE BTP03 is connected to a device (the Bluetooth® 
button (3) is lit up in blue), press the Bluetooth® button (3): the Bluetooth® button (3) alternately flashes 
blue and red. Your WAE BTP03 is now ready for pairing and connection of a second device. When the 
second device is connected (the Bluetooth® button (3) is lit up in blue), you can reconnect your first 
device using that device’s Bluetooth® menu.
Only one smartphone/tablet can play music at a time. To switch from one device to another, 
pause music playback on the first device, and then start music playback on the second device.
Switching from one device to another can take from 3 to 10 seconds, depending on the 
smartphone/tablet models.
3. Bluetooth® disconnection and new pairing
When the WAE BTP03 is connected to either one or two devices (smartphone, digital music player, 
PC/Mac…), press the Bluetooth® button (3) to disconnect the paired device. The Bluetooth® button (3) 
alternately flashes red and blue to indicate that you can now pair another Bluetooth® device.
4. Clearing the saved list of paired devices
Your WAE BTP03 can save pairing information for up to 8 devices. A long press (5 seconds) on the 
hands-free calling zone (4) on the top right part of your WAE BTP03 speaker lets you clear the saved list 
of paired devices. The Bluetooth® button (3) flashes blue 3 times, and your WAE BTP03 is then ready for 
pairing new devices.
5. Volume control
The + and – buttons (1 and 2) let you control the volume of your WAE BTP03, independently of your 
Bluetooth® device.
6. Playing the sound on another audio system
The line output connector (9) lets you connect the WAE BTP03 to any audio system featuring a line input 
(hi-fi system, car stereo system...), turning the WAE BTP03 into a Bluetooth® receiver. To do so, set the 
switch (7) to Mute (the sound will not be played on the WAE BTP03). Connect a 3.5 mm (male)/3.5 mm 
(male) stereo cable (not included) to the line output connector (9) on the WAE BTP03, and to the line 
input connector on the audio system that will be playing the music (hi-fi system, car stereo system...).
7. Connecting multiple WAE BTP03 speakers to one another
The line output connector (9) also lets you connect multiple WAE BTP03 speakers to one another, in 
order to increase the overall audio output level: connect a 3.5 mm (male)/3.5 mm (male) stereo cable 
(not included) to the line output connector (9) on one WAE BTP03 speaker, and to the line input 
connector (8) on another WAE BTP03 speaker.
8. Hands-free calling
A short press on the hands-free calling zone (4) on the top right part of your WAE BTP03 speaker lets you 
answer an incoming call, or end a call. During a call, the Bluetooth® button (3) lights up in red.
To end a call, press the hands-free calling zone (4) on the top right part of your WAE BTP03 speaker, or 
the button on your phone that lets you end the call.
Once the call is over, the WAE BTP03 continues playing the music that had been playing before you took 
the call.
9. Battery and charging
When your battery has run out of power, the audio volume decreases by 50% and the battery level indicator 
(6) on the back of the speaker flashes red for one minute: the WAE BTP03 then powers off. To recharge the 
battery, use the included USB cable 
While charging, the battery level indicator (6) flashes green. When the battery is fully charged, the 
battery level indicator (6) stays lit up in green.
10. Standby mode
When your WAE BTP03 is not connected to any device either via the Bluetooth® function or via the line input 
for 15 minutes or more, it switches to standby mode to save battery power. You can “wake it up” from standby 
mode by pressing the Bluetooth® button (3).
11. Charging function
Your WAE BTP03 features a USB port, allowing you to charge an external device (smartphone, digital music 
player).
Set the switch (7) to ON or Mute, and connect the external device to the USB port (11).
The power supply for charging via the USB port is 500 mA, which allows you to charge most smartphones; 
however, you cannot charge a tablet via the USB port.
The charging function is disabled when your BTP03’s battery power level is too low, or when the BTP03’s 
battery is charging.
Manuel de l’utilisateur (FRANÇAIS)
1. Volume + 
 
 
 
8. Entrée ligne
2. Volume - 
 
 
 
9. Sortie ligne
3. Bouton technologie sans fil Bluetooth® (témoins bleu/rouge)10. Port micro USB DC input 5V 1A
4. Zone fonction mains libres (le bouton se trouve 
11. Port USB DC 5V 500 mA (pour recharger un
sous le pied de l’enceinte) 
 
 
smartphone)
5. Microphone 
 
 
 
12. Trappe batterie
6. Témoin de batterie (vert/rouge) 
 
13. Câble USB
7. Sélecteur                (OFF/ON/Muet)  
Charge avant 1ère utilisation
Effectuez une charge complète du WAE BTP03. A la fin de la charge, le témoin vert (6) reste allumé. Une 
charge complète peut prendre jusqu’à 11 h.
1. Prise en main
Pour allumer votre appareil, placez le sélecteur (7) sur ON.
Lors de la première utilisation, votre WAE BTP03 est prêt pour l’appairage pendant 5 minutes : les témoins 
Bluetooth® bleu et rouge (3) clignotent. Par la suite, appuyez brièvement sur le bouton Bluetooth® (3) pour 
lancer l’appairage.
- Sur votre smartphone, baladeur numérique ou PC/Mac, activez la fonction Bluetooth®, puis lancez une 
détection.
- Sélectionnez WAE-BTP03 dans la liste et effectuez l’appairage (si un code d’accès est requis, saisissez 0000).
Une fois les appareils appairés et connectés, le témoin Bluetooth® bleu (3) du WAE BTP03 reste allumé. Vous 
êtes prêt à diffuser votre musique.
Lorsqu’un appareil est branché sur l’entrée ligne (8), toute diffusion audio via la fonction Bluetooth® est 
impossible et le témoin Bluetooth® (3) est éteint. Il suffit de débrancher l’appareil de l’entrée ligne (8) 
pour pouvoir à nouveau diffuser de la musique via la fonction Bluetooth®.
2. Connecter deux appareils simultanément au WAE BTP03
Votre WAE BTP03 prend en charge le profil A2DP Multipoint. Vous pouvez appairer et connecter deux 
smartphones/tablettes simultanément. Pendant que votre WAE BTP03 est connecté à un appareil (témoin 
bleu (3) allumé), appuyez sur le bouton Bluetooth® (3), le témoin (3) clignote alternativement bleu/rouge. 
Votre WAE BTP03 est prêt pour l’appairage et la connexion à un deuxième appareil. Lorsque le 2ème appareil 
est connecté (témoin bleu (3) allumé), vous pouvez reconnecter votre 1er appareil à l’aide de son menu 
Bluetooth®.
Un seul smartphone/tablette peut jouer de la musique à la fois. Pour passer de l’un à l’autre, mettez en 
pause la lecture en cours sur le premier appareil, puis lancez la lecture sur le deuxième appareil.
Le passage de l’un à l’autre peut prendre de 3 à 10 secondes selon les modèles de 
smartphones/tablettes.
3. Déconnexion et nouvel appairage Bluetooth®
Lorsque le WAE BTP03 est connecté à un ou deux appareils (smartphone, baladeur numérique, PC/Mac...), une 
simple pression sur le bouton d’appairage (3) permet de déconnecter l’appareil appairé. Les témoins 
Bluetooth® rouge et bleu (3) clignotent alternativement pour signaler que l’appairage d’un autre appareil 
Bluetooth® est possible.
4. Effacement des mémorisations
Jusqu’à 8 appareils peuvent être mémorisés par le WAE BTP03. Un appui long (plus de 5 secondes) sur la zone 
d’appel mains libres (4) en haut à droite du WAE BTP03 permet d’effacer la liste des appareils déjà appairés. Le 
témoin Bluetooth® bleu (3) clignote 3 fois, puis votre WAE BTP03 est disponible pour l’appairage de nouveaux 
appareils.
5. Contrôle du volume
Les boutons + et – (1 et 2) permettent de contrôler le volume de votre WAE BTP03 indépendamment de votre 
appareil Bluetooth®.
6. Diffusion du son par un autre système audio
Le connecteur de sortie de ligne (9) permet de connecter le WAE BTP03 à tout système audio disposant d’une 
entrée ligne (chaîne hifi, autoradio...), et d’en faire ainsi un récepteur Bluetooth®. Pour cela, commutez le 
sélecteur (7) sur Muet (le son ne sera pas diffusé par le WAE BTP03). Branchez un câble stéréo 3,5 mm/3,5 mm 
(non fourni) à la sortie ligne (9) du WAE BTP03 et à l’entrée ligne du système audio qui diffusera la musique 
(chaîne hifi, autoradio...).
7. Branchement en série de plusieurs WAE BTP03
Le connecteur de sortie ligne (9) permet également de brancher plusieurs WAE BTP03 en série afin 
d’augmenter le niveau sonore : branchez un câble stéréo 3,5 mm/3,5 mm (non fourni) à la sortie ligne (9) du 
WAE BTP03 et à l’entrée ligne (8) d’un autre WAE BTP03.
8. Appels mains libres
Un appui court sur la zone d’appel mains libres (4) en haut à droite du WAE BTP03 permet de répondre à un 
appel entrant ou de le terminer.
Lors d’un appel, le témoin Bluetooth® rouge (3) s’allume.
Pour terminer un appel, appuyez sur la zone d’appel mains libres (4) en haut à droite du WAE BTP03 ou sur le 
bouton de fin d’appel du téléphone.
A la fin de l’appel, le WAE BTP03 reprend la diffusion du morceau en cours de lecture.
9. Batterie et charge
Lorsque votre batterie est vide, le volume sonore est diminué de 50% et le témoin rouge (6) à l’arrière clignote 
pendant une minute avant l’extinction du WAE BTP03. Pour recharger la batterie, utilisez le cable USB (13).
Lors de la charge, le témoin de batterie (6) clignote en vert. Lorsque la batterie est complètement 
chargée, le témoin de batterie vert (6) reste allumé.
10. Mode veille
Lorsque le WAE BTP03 n’est connecté à aucun appareil via la fonction Bluetooth® ou via l’entrée ligne pendant 
plus de 15 minutes, il passe en veille afin de préserver la batterie. Vous pouvez le réactiver en appuyant sur le 
bouton Bluetooth® (3).
11. Fonction recharge
Votre WAE BTP03 est équipé d’un port USB permettant de recharger un dispositif externe (smartphone, 
baladeur numérique).
Placez le sélecteur (7) sur ON ou Muet, puis branchez le dispositif externe au port USB (11).
L’intensité de fonctionnement est de 500 mA, ce qui permet de recharger la plupart des smartphones. Il ne 
sera pas possible de recharger une tablette.
La fonction recharge est désactivée lorsque la batterie de votre BTP03 est trop faible ou en charge.
Benutzerhandbuch (DEUTSCH)
1. Lautstärke + 
 
 
 
8. Line-Eingangsbuchse
2. Lautstärke - 
 
 
 
9. Line-Ausgangsbuchse
3. Kabellose Bluetooth®-Technologie-Button (blau/rot)  10. 5 V/1 A DC Mikro-USB-Eingang
4. Freisprech-Fläche (die entsprechende    
11. 5 V/500 mA DC USB-Anschluss (ermöglicht
Schaltfläche befindet sich unterhalb der Basis des  
das Aufladen eines Smartphones)
Lautsprechers) 
 
 
 
12. Deckel des Akkufachs
5. 
Mikrofon    13. 
USB-Kabel
6. Akku-Ladestandanzeige (grün/rot)  
7.                (AUS-/AN-/Mute-) Schalter 
 
 
Vor dem ersten Gebrauch bitte vollständig aufladen
Laden Sie Ihren WAE BTP03 vor dem ersten Gebrauch bitte vollständig auf. Nach Beenden des 
Ladevorgangs leuchtet die Akku-Ladestandanzeige (6) grün. Die Ladezeit kann bis zu 11 Stunden in 
Anspruch nehmen.
1. So nehmen Sie Ihr WAE BTP03 in Betrieb
Um Ihr Gerät anzuschalten, stellen Sie den Schalter (7) auf ON.
Wenn Sie Ihr Gerät zum ersten Mal in Betrieb nehmen, ist Ihr WAE BTP03 für etwa 5 Minuten sofort 
kopplungsbereit. Der Bluetooth®-Button (3) blinkt blau und rot. Danach können Sie den Bluetooth®-Button 
(3) jederzeit drücken, um den Kopplungsprozess erneut zu starten.
- Sie müssen auf Ihrem Smartphone, digitalem Musikabspielgerät oder bei PC/Mac die 
Bluetooth®-Funktion aktivieren und dann eine Gerätesuche innerhalb der Reichweite ausführen.
- Wählen Sie aus der angezeigten Liste WAE-BTP03 und koppeln die Geräte miteinander (falls ein 
Zugangscode erforderlich sein sollte, geben Sie bitte 0000 ein).
Nachdem die Geräte gekoppelt und miteinander verbunden sind, leuchtet der Bluetooth®-Button (3) an 
Ihrem WAE BTP03 dauerhaft blau. Sie können nun Ihre Musik wiedergeben.
Falls ein Gerät über den Line-Eingang (8) angeschlossen wurde, kann kein Audio via die 
Bluetooth®-Funktion abgespielt werden und der Bluetooth®-Button (3) leuchtet nicht. Um Ihre Musik 
wieder via die Bluetooth®-Funktion genießen zu können, stöpseln Sie das Gerät am Line-Eingang (8) aus.
2. Anschluss von zwei Geräten gleichzeitig an Ihrem WAE BTP03
Ihr WAE BTP03 beinhaltet A2DP Multipoint-Technologie, so dass Sie gleichzeitig zwei 
Smartphones/Tablets koppeln und verbinden können. Wenn Ihr WAE BTP03 mit einem Gerät verbunden 
ist (der Bluetooth®-Button (3) leuchtet blau): Drücken Sie den Bluetooth®-Button (3) – der 
Bluetooth®-Button (3) blinkt abwechselnd blau und rot. Ihr WAE BTP03 ist nun für das Koppeln und 
Verbinden eines zweiten Gerätes bereit. Sind Sie mit dem zweiten Gerät verbunden (der 
Bluetooth®-Button (3) leuchtet blau), können Sie Ihr erstes Gerät wieder neu verbinden indem Sie das 
Bluetooth®-Menü dieses Gerätes benutzen.
Aber nur ein Smartphone/Tablet kann zur selben Zeit Musik wiedergeben. Um von einem zum 
anderen Gerät umzuschalten, müssen Sie die Musikwiedergabe des ersten Gerätes 
pausieren/anhalten und dann die Musikwiedergabe am zweiten Gerät starten.
Das Umschalten zwischen den Geräten kann je nach Smartphone- oder Tabletmodell zwischen drei 
bis zehn Sekunden in Anspruch nehmen.
3. Bluetooth®-Trennung und Neukopplung
Wenn das WAE BTP03 mit einem oder zwei Gerät(en) (Smartphone, digitales Musikabspielgerät, PC/Mac …) 
verbunden ist, drücken Sie den Bluetooth®-Button (3), um das gekoppelte Gerät zu trennen. Der 
Bluetooth®-Button (3) blinkt abwechselnd rot und blau und zeigt damit an, daß Sie ein anderes 
bluetoothfähiges Gerät koppeln können.
4. Löschen der Speicherliste gekoppelter Geräte
Ihr WAE BTP03 kann Kopplungsinfos von bis zu acht Geräten speichern. Ein langer Druck (5 Sekunden) oben 
rechts (4) an Ihrem WAE BTP03 Lautsprecher ermöglicht Ihnen das Löschen der Speicherliste gekoppelter 
Geräte. Der Bluetooth®-Button (3) leuchtet dreimal blau auf und Ihr WAE BTP03 ist nun in der Lage zum 
Koppeln neuer Geräte.
5. Lautstärkereglung
Die + und – Buttons (1 + 2) dienen der von Ihrem Bluetooth®-Gerät unabhängigen Lautstärkereglung Ihres 
WAE BTP03.
6. Wiedergabe über ein anderes Audiosystem
Der Line-Ausgang (9) ermöglicht den Anschluss des WAE BTP03 an jedes Audiosystem mit einem 
Line-Eingang (Hi-Fi-Anlage, Stereo-Autoradio und/oder Anlage ...). Dabei wird der WAE BTP03 zu einem 
Bluetooth®-Empfänger. Um dies zu ermöglichen, stellen Sie den Schalter (7) auf Mute (es erfolgt keine 
Wiedergabe über den WAE BTP03). Verbinden Sie ein Stereokabel mit beidseitig 3.5 mm Stecker (nicht 
enthalten) mit der Line-Ausgangsbuchse (9) des WAE BTP03 und dem Line-Eingang Ihres Audiosystems, 
über das die Musik wiedergegeben werden soll (Hi-Fi-Anlage, Stereo-Autoradio und/oder Anlage ...).
7. Anschluß von mehreren WAE BTP03 Lautsprechern miteinander
Über die Line-Ausgangsbuchse (9) können Sie auch, um die allgemeine Ausgangsleistung zu erhöhen, 
mehrere WAE BTP03 miteinander anschließen. Verbinden Sie ein Stereokabel mit beidseitig 3.5 mm 
Stecker (nicht enthalten) mit der Line-Ausgangsbuchse (9) des WAE BTP03 und der Line-Eingangsbuchse 
(8) des anderen WAE BTP03 Lautsprechers.
8. Freisprechen
Ein kurzer Druck oben rechts (4) an Ihrem WAE BTP03 Lautsprecher ermöglicht eine Annahme oder das 
Beenden eines ankommenden Anrufs.
Während eines Anrufs leuchtet der Bluetooth®-Button (3) rot.
Um einen Anruf zu beenden, drücken Sie oben rechts (4) an Ihrem WAE BTP03 Lautsprecheroder auf den 
entsprechenden Button auf Ihrem Smartphone.
Nach Beenden des Anrufs wird die Musikwiedergabe auf Ihrem WAE BTP03 fortgesetzt.
9. Akku und Laden
Wenn Ihr Akku leer ist, mindert sich die Lautstärke um 50% und die Akku-Ladestandanzeige (6) – hinten 
am Lautsprecher – blinkt für eine Minute rot. Danach schaltet sich der WAE BTP03 aus. Um den Akku 
wieder aufzuladen, benutzen Sie bitte das beigelegte USB-Kabel (13) 
Während des Ladens blinkt die Akku-Ladestandanzeige (6) grün. Ist der Akku vollständig geladen, 
leuchtet die Akku-Ladestandanzeige (6) dauerhaft grün.
10. Stand-by-Modus
Wird Ihr WAE BTP03 länger als 15 Minuten nicht via die Bluetooth®-Funktion oder Line-Eingang genutzt, 
schaltet sich dieses automatisch in den Stand-by-Modus, um Akku-Ladung zu sparen. Sie können Ihr 
Gerät jederzeit durch Drücken des Bluetooth®-Buttons (3) wieder „aufwecken“.
11. Ladefunktion
Ihr WAE BTP03 verfügt zum Laden eines externen Gerätes (Smartphone, digitales Musikabspielgerät) 
über einen USB-Anschluss.
Stellen Sie den Schalter (7) auf ON oder Mute und schließen ein externes Gerät an den USB-Anschluss (11) an.
Die Ladespannung am USB-Anschluss beträgt 500 mA und ermöglicht das Laden der gängigsten 
Smartphones. Es ist aber nicht möglich ein Tablet via des USB-Anschlusses zu laden.
Die Ladefunktion für externe Geräte ist deaktiviert wenn der Akku-Ladestand Ihres BTP03 zu niedrig 
ist oder wenn der Akku des BTP03 geladen wird
UK/US
FR
DE
NL
IT
ES
1
5
4
2
3
13
Playing the sound on another audio system/Diffusion du son par un autre système audio/Wiedergabe über 
ein anderes Audiosystem/Het geluid op een ander audiosysteem afspelen/Ascoltare il suono proveniente da 
un altro sistema audio/Reproducción del sonido en otro sistema de audio
Hands-free calling/Appels mains libres/Freisprechen/Handsfree bellen/
Chiamate a mani libere/Llamadas con manos libres
aux
6
11
12
IN
OUT
DC IN
5V 1A
7
10
8
9
OFF
ON
MUTE
Guillemot Corporation S. A.