Guillemot 5061156 User Manual

Page of 94
HWNAP-300                                                                                                                                                               Hercules Wireless N Access Point 
You now have two minutes to connect your Hercules Wireless N USB Key or your device via WPS. 
If the connection is not secure, a 
WPA
 or 
WPA2
 type security key (depending on the client's capabilities) is 
generated automatically. 
For more information on connecting your device via WPS, please refer to the PDF user manual of your 
Hercules Wireless N USB Key or to the manual supplied by the manufacturer of your WPS device.
2.7.2.Connecting to a network in client mode 
Note: by default, your Hercules Wireless N Access Point is configured to master mode, meaning that it will 
serve as the access point to which other WPS devices will be able to connect.  By switching to client mode,
your access point will connect to a master WPS device which will become the access point.  You should be 
aware, however, that your Hercules Wireless N Access Point, with its access point function, is not meant to 
connect to other WPS devices. 
- On the WiFi Manager N home page, press the 
Automatic WiFi client connection (WPS)
button. 
- Click the Advanced settings button.
Two options are available to you: Master mode or 
Client mode.
- Select Client mode.
WiFi Manager N displays the PIN code for your 
Hercules Wireless N Access Point.  Make a note of 
this code, as you will have to enter it in the client's 
interface in order to connect your Access Point to 
other devices. 
 User Manual – 29/94