Bendix Commercial Vehicle Systems LLC TX433CS-3 User Manual

Page of 2
 
 
 
 
                
 
 
 
 
Dealer Stamp 
 
 
 
SmarTire Systems Inc.
 
SmarTire Europe Limited
 
Suite 150, 13151 Vanier Place
 
Park 34
 
Richmond, British Columbia
 
Didcot, Oxfordshire
 
Canada, V6V 2J1
 
United Kingdom, OX11 7WB
 
Tel:  
1.604.276.9884
 
Tel:  
+44.1235.511010
 
Fax:   1.604.276.0864
 
Fax:   +44.1235.514640
 
Email: info@smartire.com
 
Email: info@smartire.co.uk
 
www.smartire.com 
www.smartire.com 
SMARTIRE HIGH PRESSURE TIRE MONITORING SYSTEM  
INSTALLATION INSTRUCTIONS 
710.0016   13-Mar-04 
Parts 
QTY Part 
number 
Description QTY 
Part 
number 
Description 
200.0087 
Receiver, Shielded 
101.1060  
Antenna Kit, 60’  
200.0068 
Full Function Display (FFD) 
101.1040 
Antenna Kit, 40’ 
200.0101 
Transmitter - Strap Ts-2 
101.1020  
Antenna Kit, 20’ 
264.0115 
Strap - Stainless Steel Clamp 
 
 
 
1 260.0157 
FFD 
Cable 
   
 
260.0158 
Power Cable 
 
 
Note: Antennas 
purchased as required 
Technical Specifications 
 
Receiver  
Transmitter  
Input Supply 
10 -18 vDC 
 
Power Consumption 
Normal = 480 mW, Max = 1.90 W 
 
Weight 
454 g, (16.0 oz) 
40 g (1.4 oz) 
Dimensions 
102 x 117 x 38 mm (4.0 x 4.6 x 1.5 in.) 
71 x 33 x 16 mm (2.8 x 1.3 x .63 in.) 
Operating Temperature 
-40 ºC to 85 ºC (-40 ºF x 185 ºF) 
-40 ºC to 125 ºC (-40 ºF x 257 ºF) 
Pressure Accuracy 
 
+/- 4.35 PSI (0.3 BAR) 
Maximum Cold Inflation 
Pressure 
 
160 PSI (11.03 Bar) 
Maximum Operating 
Pressure 
 
188 PSI (13.0 Bar) 
Battery Life 
 
5 years at 48,000 km/yr (30,000 
miles/yr) - approx.  
Factory Default Pressure Settings 
The default pressure settings can be customized to suit the application as required. Use the Full 
Function Display and follow the SmarTire FFD Manual carefully to change the default settings if 
required. 
Cold Inflation Pressure 
125 PSI 
Low Pressure Warning 
110 PSI 
Pressure Deviation Alert 
10 PSI 
High Temperature Warning 
195
º F 
 
Warnings 
This tire monitoring system does not in any way replace the need for regular maintenance of the tire 
pressures and tire conditions. 
 
System Installation and Usage 
Use of the SmarTire® system requires that it has been properly installed and programmed by qualified 
personnel according to SmarTire Systems Inc. documentation. This includes the Owner’s Manual and 
any supplementary installation instructions included with system components. 
 
Use of Chemicals 
Temporary resealing or reinflation products containing internal sealers or propellants in any tire/wheel 
assembly may adversely affect the operation of the Sensor/Transmitters. 
 
Reacting to Alerts 
When an alert or warning condition is detected, reduce vehicle speed to an appropriate safe level and 
proceed to a safe stopping location or facility where the tire can be inspected and serviced. The low 
pressure alert or warning indicates that the air pressure has dropped to a selected minimum. 
FCC NOTICE 
This device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) this 
device may not cause harmful interference, and(2) this device must accept any interference received, including 
interference thatmay cause undesired operation.This equipment has been tested and found to comply with the 
limits for a Class Bdigital device, pursuant to Part 15 of the FCC Rules. These limits are designed toprovide 
reasonable protection against harmful interference in a residentialinstallation. This equipment generates, uses and 
can radiate radio frequency energyand, if not installed and used in accordance with the instructions, may cause 
harmfulinterference to radio communications. However, there is no guarantee thatinterference will not occur in a 
particular installation.If this equipment does cause harmful interference to radio or television reception,which can 
be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one 
or more of the followingmeasures:•Reorient or relocate the receiving antenna.•Increase the separation between 
the equipment and receiver.•Connect the equipment into an outlet on a circuit different from that to whichthe 
receiver is connected.•Consult the dealer or an experienced radio/TV technician for help.Changes or modifications 
to this device without the express approval of SmarTireSystems Inc. may void the user’s authority to use this 
device.