D-Link DPS-510 Leaflet

The DPS-510 is the backup Redundant Power Supply for

the DES-3010PA. When the DES-3010PA is equipped with

the DPS-510, both power supplies are switched on and

share the current load. In case the power supply of the

DES-3010PA should fail, the DPS-510 will instantaneously

take 100% of the load without any loss. The DPS-510

provides up to 130 Watts of redundant power to help insure

that even PoE powered devices such as phones, APs, and

cameras remain alive and active in the event the internal

power supply fails. In addition, the DPS-510 also supports

a fan-failure signal to indicate when a fan is about to fail

based on detected reduced fan RPM. The DPS-510 is rack

mountable and can be mounted in an EIA standard-size

19-inch rack. If rack mounting is not required, the DPS-510

can also be easily placed on a desktop or wiring closet

shelf. The DPS-510 includes everything you need to get

started right out of the box including: AC Power cord, RPS

cable for connecting to the DES-3010PA, Rack mounting

brackets for rack installations and rubber feet for desktop

or shelf mounting.

DPS-510 Redundant Power Supply

D-Link Systems, Inc. 17595 Mt. Herrmann Street Fountain Valley CA 92708 www.dlink.com

logo, and RangeBooster N are trademarks or registered trademarks of D-Link Corporation

or its subsidiaries in the United States and other countries. Other trademarks or registered

trademarks are the property of their respective owners

High Performance

+  130 Watts Power Supply
+  Short Circuit Protection
+  Over Voltage Protection
+  Rack Mountable
+  Fan Failure LED

TECHNICAL SPECIFICATIONS
Product Specifications

DPS-510

130 watt Redundant Power Supply for the DES-3010PA

LEDs

Power, Fan Failure

Protection

Over voltage protection; short circuit protection

Electrical & Emissions Summary

Input Voltage

100 to 240 VAC, 50 ~60 Hz Internal Universal Power Supply

Output Voltage

48V, 2.7A

Power Consumption

130 watts. (max.)

Heat Dissipation

13.9BTU

Physical Specifications

Temperature

Operating: 0° ~ 40° C (32º to 104º F)
Storage: -10° ~ 70° C (14º to 158º F)

Humidity

Operating: 10% ~ 90% RH, Non-condensing
Storage: 5% ~ 90% RH, Non-condensing

Dimensions (Wx D x H)

7.09” x 11.02” x 1.73” (180.1mm x 279.9mm x 43.9mm)

Safety Agency Certifications

Safety

FCC Class A, CE Mark Class A, VCCI Class A, CUL

Warranty Information

Warranty*

1-Year

Ordering Information

DPS-510

130 Watt Redundant Power Supply

DES-3010PA

Managed L2 Switch with (8) 10/100Mbps PoE Ports and (1) Gigabit SFP and (1) 1000Base-T Copper Port

1-Year warranty available only in the U.S.A and Canada